Making something with your own hands is always a creative and interesting process for both children and adults. Let's talk about origami. This kind of creativity came to us from Japan. Origami is an amazing technique that we have known since childhood. Well, who, while still quite a child, did not fold funny jumping frogs, ships and steamers, airplanes from paper, did not make a cap or hat from a newspaper? They did everything, although even the word "origami" was not always heard at that age. The art of origami is real magic, when figures are obtained from a sheet of paper and seem to come to life. There are many options for origami schemes, we will consider the simplest and most popular in step-by-step instructions.
Making a paper design from paper is a creative process. The main thing is to do it gradually. You can finish painting the details or add elements at your discretion and lower it into the water. Below is the step by step boat creation:
Fold the original A4 sheet in half, taking the long edges, draw a fold line. Expand, do the same, but taking the narrow edges, leave it folded. In front of you lies a folded sheet with narrow edges on the right and left. Take it by the "non-swing" corners and fold them to the center, where the fold line from the first step passes, leave them folded. Open and fold the free edges of the paper: one to the long side of the triangle obtained by the previous action, turn the other to the opposite side, similar to the first. A triangle is located in the rectangle. Fold the edges of the rectangle adjacent to the sides of the triangle inward so that the folds coincide with the side of the triangle.
Now pull the centers of the hypotenuse outward so that the ends come closer and fold the square. Open the free ends of the square in opposite directions on a diagonal. Expand in the same way as when receiving the previous square. Pull the ends that were folded from the first square, a corner will appear between them, straighten the ends down. Get an origami boat with a corner at the top.
In this technique, not only a boat can be made - and a yacht, and a two-tube steamer, and a whole submarine made of paper or cardboard, even an old paper map can be used as an improvised material, the skin of such a boat will look original.
In the gallery you will find a template and drawing for folding a boat using origami technique.
Gallery: paper origami boat (25 photos)
Do-it-yourself paper origami steamer
In the work with the construction of the steamer, a sheet with right angles and the same sides is used. Fold the sheet diagonally, there are two, and unfold. Fold the four ends at the center point where the folds of the diagonals meet. Lift the received up with the smooth side, without free corners in the middle, put for convenience. Fold the four ends towards the center as well. After turning the origami blank, bend the ends again. Straighten the opposite diamonds to make two rectangles. They will stand out from the square. Bring the rectangles together, while lifting the untouched diamonds from the center. It will turn out an origami steamer.
How to make a paper boat with your own hands
Position the sheet in front of you with the long edges of the sheet to the left and right. Now fold, in turn, the sharp ends to the sides of the sheet diagonally: right corner to the left side, draw a line with your finger, left edge to the right, slide your finger. When folded, the narrow edge of the sheet matches the long one. Leave the left corner folded towards the right side. Outside the triangle, a piece of paper remains untouched, fold it in half so that the unused edge of the sheet adjoins the side of the triangle without crossing it. Fold the non-swinging corners of the rectangle to the original, large triangle, without overlapping it.
From the large triangle, you need to make a smaller one so that the middle of the long side of the original one becomes the top of the small one. To do this, unfold it into the original sheet and fold it in half, the narrow edge of the sheet will touch the rectangle with curled corners, slide your finger along the fold. Expand the sheet. You see three lines: two diagonally, intersecting each other, and one across the sheet, crossing the diagonals in the center. Further steps on how to make a paper boat:
- Raising the transverse fold, bring the left corner of the sheet to the left side of the rectangle without crossing it, and the right to the right. The result is a small triangle.
- Turn the workpiece over. If you visually draw a line from the top of the triangle perpendicular to the base, you get two symmetrical halves. Bend the workpiece along this line.
- Expand, and, to the resulting fold line, fold the two sides of the triangle, you get a sharp triangle, the bent corners of the first rectangle should coincide with the short side.
- Fold the same angles of the triangle to a visual line lowered from the third corner perpendicular to the short side.
You have made a rectangle with two obtuse and two acute corners. The sharp angle formed by the long sides will be the bow of the boat and the other will be the stern. Obtuse corners need to be folded to the line from the previous step, and along this line, fold the workpiece in half to the other side of the motion when folding obtuse corners. Lift the piece of paper and unfold it a little, you will see five long folds along the piece. There is very little left follow the instructions:
- Turn deep folds with sides of the middle outer fold outward so that the inner folds become the longitudinal edges of the boat bottom, and straighten the guide corners from the stern.
- Spread the top of the stern between them.
- Fold the edges of the boat inward and you will get a shape like a rectangle with obtuse and sharp corners, only obtuse corners are beveled, turn the edges of the boat perpendicular to the bottom.
- Place the paper boat on the bottom and lift the "windshield" from the bottom.
- Smooth all the edges of the garment. Origami boat ready.
Step-by-step instructions on how to make an origami paper yacht with your own hands
We use a sheet with the same sides. Bring the two opposite corners together and press the fold. Fold the triangle by bringing two equal corners together. The result is a smaller triangle. Unfold it and fold the same sides of the large triangle to the fold line. The result is a quadrangle with two sharp and two obtuse corners. Lay the product in a long, sharp corner "away from you." Turn the ends that form the second sharp corner away from you to the sides.
You will see the base of the large triangle, the vertices of the triangles formed by the previous action will join it. The long sides of the triangles will be perpendicular to the center line from the long, sharp corner "away from you." Unfold the origami product slightly and split the sharp, long corner. Fold one of the sharp corners, which is taken out of the second, to the left so that the fold line continues one of the same sides of the right triangle. Further scheme,
Origami is not only an educational art, but also an excellent opportunity to captivate a child with an entertaining game with paper figures. If the kid does not yet know how to make a boat out of paper, be sure to teach him how to fold such a toy. The child will develop the further scenario of the game himself: the paper boat can roll the animals from the Kinder Surprise, and the "real" canoe is simply irreplaceable for every Indian for hunting and exploring the mysterious rocky grottoes.
What do you call the boat? Canoe and paper punt.
The origami boat is easy to fold and detailed step-by-step instructions will help you cope with the task in a couple of minutes. Having mastered the proposed schemes, show them in practice to the kids. For children, the first origami skills will be very useful: this is an educational game, and accuracy training, and an exercise in concentration. Let's step by step consider how a paper boat is folded with our own hands, relying on 2 elementary diagrams.
Option 1 "Punt"
Making a punt boat out of a sheet of paper
This paper toy for kids is especially interesting because it is quite possible to seat little passengers in it and send them on a real river cruise - this origami boat will easily hold miniature crafts and small toys on real water. The scheme is simple:
- Fold a rectangular (square) sheet in half lengthwise, then across (for ease of orientation to the center), then return it to its original state;
- Fold the top edge of the sheet inward to the middle, repeat the operation with the bottom side. Note that a rectangular (not square) sheet is folded similarly from a horizontal orientation;
- Continuing to fold the paper boat, bend each corner of the workpiece evenly inward (as in Fig. 1);
- Exacerbate the sharpness of the tapered parts of the paper blank to go to the final stage of folding the toy - bend the corners again, as shown in the diagram;
- Fold the product away from you along the central edge of the workpiece, and then carefully turn out the structure, revealing the central crevice (take pliable paper, cardboard may not work);
- Straighten the toy gently, squeeze the inner folds - your origami boat is ready to launch.
Option 2 "Canoe"
Making a canoe out of a sheet of paper
You can fold another boat out of paper with your own hands without spending too much time. The Indian canoe will require a little more attention due to its design features - the closed bows of the toy. It is better to make a cake out of paper, because it may not work out of cardboard. The canoe is folded by analogy with a punt. Let's take a closer look:
- Fold the square sheet in half and from top to bottom, and from left to right - the central intersection of the workpiece will form;
- Then turn each corner evenly inward, focusing on the center - you get a neat smaller square;
- Expand the sheet to its original state and again bend each corner inward, but now align the top of the corner with the nearest face (see Fig. 2);
- It turns out that each corner will now be bent inward twice - a "TV" is formed (a square in a neat "frame");
- Turn the paper-folding boat upside down and fold the top quarter of the blank towards you, focusing on the center. Do the same with the lower quarter;
- Bend the corners of the resulting rectangle inward - the boat is almost ready;
- Exacerbate the sharpness of the conical protrusions, additionally bending the corners inward (as in Fig. 2), also "fold" obtuse corners towards you;
- Carefully unfold the piece and, holding the folds, turn it inside out, then straighten the canoe's noses from the inside.
Not right away, but your child will also be able to fold the original boat from a simple sheet of paper. It is possible that a growing family member will soon surpass you in origami skills. After a couple of months, don't be surprised if a child comes up to you and shows you how to fold a submarine, or maybe even more difficult - a real one! Origami is a fascinating art once you get carried away. Why not start now with a little paper boat?
It is easy to make a toy boat from a simple sheet of paper and put it on sailing along the stream and along the water expanses of the bath. You just need to remember a simple instruction on how to make a boat out of paper, how to fold it in order to get a structure stable on water. This is a simple but very exciting business.
Parents can make paper toys for small children; older children can learn this simple art themselves. A series of video tutorials offers master classes after watching which you can superbly build entire fleets of paper boats yourself. They will become soaked over time, but you will have time to make new ones.
The video tutorial details the following steps:
- bend A4 sheet in half, then in half again;
- fold the corners of the sheet to the center;
- bend one of the remaining strips up and bend the corners, the same on the other side.
Next, open the resulting square and add it along the other axis. Bend the corners to the center, but not completely. If the points to which the bend is made are placed at different heights, the bow and stern of the boat will have different heights, which will look interesting. Then again the square is folded along the other diagonal. It remains to open the structure by pulling the opposite ends with your fingers and slightly trim the resulting boat.
It can be placed on a table, it will be stable. He might as well be able to float on the water. Now you know how to make a paper boat.
Video lesson:
To make a boat out of paper with your own hands, you must:
- take a sheet of paper measuring 20 x 20 cm and fold it diagonally, then along the other diagonal and unfold it;
- bend one of the corners of the sheet to the center;
- fold the sheet diagonally several times.
Then several small triangles are bent, and a series of bends are made, during which the boat's tube and other elements are formed. To do everything right, you must adhere exactly to the instructions of the video tutorial. The stern of the boat is folded and its halves are fixed with glue. This is the only place where the structure is not held by the forces of paper bending, but requires the use of glue.
The boat resembles a modern pleasure boat in its shape, has a fast-paced appearance and is very stable both on a hard table surface and on the surface of the water.
Video lesson:
The proposed step-by-step instruction in the video tells how to make a neat pleasure boat with rapid outlines out of paper. On sheet A4, by bending two diagonals, a regular square with diagonal bends is marked.
The strip of paper remaining after the formation of the square is folded in half, the corners are folded on it. The marked square also folds in half, and its sides are folded inward. Instead of a rectangle, a triangle is obtained. The whole structure is folded in half, the fold lines are neatly ironed.
This is followed by a number of sheet folds, which are easy to reproduce by watching the video tutorial. In the end, the paper structure turns inside out, forming a neat flat-bottomed boat that is very stable both on water and on a hard surface.
Video lesson:
Making an origami paper craft is very easy. It is enough to take a square sheet of paper and bend it diagonally. Then one of the sides of the resulting triangle is bent as shown in detail in the video. The fold lines are well ironed. The square then unfolds and all fold lines fold in the opposite direction.
Actually, this is where the manufacture of the boat ends. It has no bottom, there are only beautiful sides in the shape of the bow of the boat. The free edge of the paper triangle depicts a sail spread over the boat. Such a sailing boat, of course, will not float, but if its rear edges are glued together, it can become a beautiful silhouette that can be placed on a table or hung on a string.
For origami, it is not functionality that is important, but figurative similarity.
Video lesson:
A small capacious boat can be made from a sheet of A4 formant paper, which is quite capable of floating on water and even transporting any cargo. A square sheet of paper obtained from A4 format is folded into a rectangle, then each of the halves is folded several times, while the corners are folded that form the profile of the paper vessel.
The outlines of the bow and stern are formed by different folds, in the end, a punt with high sides is obtained. In children's games on the water, such a boat can serve as a good vehicle. She does not get wet for a long time and does not disappoint young sailors.
Video lesson:
Making paper crafts is a great way to spend time with your kids. Making a classic boat, or small boat, is one of the easiest origami tasks. At the end of manufacturing, this craft can be launched. Most likely, as a child, you launched similar ships in puddles and streams. To create a paper boat, you need a rectangular paper sheet of any shape and texture. Well, and a guide on how to make a boat out of paper, if suddenly you do not remember how to do it.
Making a boat out of paper
To make a paper boat, you will need to perform the following actions:
For starters, stock up on a suitable rectangular piece of paper.
The resulting workpiece should be folded in half again, but in the other direction, and turned back. The result of these actions will be the formed center fold line.
Now you need to bend the bottom strip upward at the points where the corners are connected, which were discussed in the previous step.
The next step in the guide to how to make a boat out of paper is to fold up the remaining bottom strip. The result of these actions should be that the workpiece will take the form of an isosceles triangle.
Now you should place your thumbs in the resulting triangle and spread them apart on the sides. The result of such actions will be that a leaf from a triangle is transformed into a square.
After that, on the left and right sides, you need to bend the lower corners of the square to the top so that the workpiece becomes triangular again.
Well, the last action is to dilute the corners in this square in the opposite direction. The resulting craft should be straightened. The paper boat is ready.
Let your child decorate the resulting craft as they see fit. The child will happily decorate the boat using felt-tip pens or colored pencils. Each ship must have its own flag. You can use a toothpick and a piece of paper to make it.
Video instruction on how to make a boat out of paper
Well, that's all, when you know how to make a boat out of paper, you just have to bring this knowledge to life and send it sailing in a stream, or at least in a bathroom. To make the paper soaked in water slower, the bottom of the boat can be treated with molten wax or paraffin.
Wait for the onset of spring and, putting on rubber boots, run through the melting snow. Better yet, go to launch boats into the nearest stream. This is how our parents and our grandparents did. And the technology of their manufacture has been familiar to everyone for a long time. In our article, we will introduce readers to the technique of assembling a paper boat. And, if you enjoy this activity, you can make a whole fleet.
This article presents 10 ways - how to make a paper boat with your own hands with step-by-step unique photos and videos.
Ships made of paper will appeal to all children. This is old fun, but despite this, it has not lost its relevance today. Probably, everyone in childhood was fond of making them, attracting friends and parents to this occupation. And then they ran to run it into the nearest trickle - you probably still remember these feelings. Make your kid happy too, make a whole paper flotilla with him. You will see, it will please him!
How to make a paper boat with your own hands
Probably, there are no such parents who are not familiar with the boat manufacturing technology. But it may have faded a little from your memory. Now that you have a toddler of preschool or primary school age, it's time to brush up on this activity. Make this beautiful spring craft with your child.
A boat made of paper is a wonderful craft. This activity will help develop fine motor skills and is an excellent exercise in spatial thinking.
Among other things, you will receive an entertaining toy. And the baby will be able to play, calling friends and relatives with him. There are a lot of game options, for example, you can arrange a race or an expedition. And you can give it to your grandfather or dad as a gift.
They can be made from colored paper and can be painted or colored. You can pick up a whole crew for the ship, using small soldiers. If the weather is not too good outside, you can play by letting them swim in the bathroom. And in the country you can use a basin for this. In short, this is an extremely exciting activity.
- Using one-sided colored paper, you will get a unique toy, since the boat will be partially painted in a certain color.
- A sailboat can be made using a regular toothpick, and a sail can be made from fabric, colored cardboard, foil, leaflets, colored napkins and much more.
- This toy can be made using office paper. And so that the boat does not get too wet while sailing, it can be made from a coated magazine sheet.
- If the toy is dipped in melted wax or paraffin, it becomes waterproof.
- Using a white sheet, you can show your imagination - decorate and paint it in any color.
Simple origami boat
There are many options for folding a paper boat. But among them one can single out, which, for sure, is familiar to many. Our parents put it according to this scheme, so the children need to be introduced to it. A distinctive feature of such a boat is its ability to stay on the water, and the duration of the voyage largely depends on the density of the material used. The step-by-step creation of such a boat using the origami technique is shown in this master class.
Any rectangular sheet will be enough for its manufacture.
First, fold it in half, and mark the middle on the folded side.
Now, focusing on this mark, bend the sides in the form of triangles.
The parts protruding from the bottom must be bent up. First, we do it on the one hand.
Turning the workpiece over, we perform the same fold up.
There are corners on the sides that need to be refilled. First, we bend the corner located on top, starting it behind the main part of our craft.
Now, on the other side (bottom corner), you need to do the same.
Repeating the steps on both sides of the triangle, we got such a blank for the future boat.
At this stage, our craft looks like a hat, which is done in the same way.
She needs to be given the shape of a square.
Turn the bottom corner at the top layer of the square up.
We turn the workpiece over and make the same fold of the corner upward.
Again, our workpiece needs to be straightened.
And fold it into a square.
Now, gently begin to pull the upper corners to the sides.
As a result, we get a boat, which remains a little to finish.
It is necessary to straighten its bottom and sides for greater stability. Our origami boat is ready for children's play.
DIY sailboat
The origami technique involves turning a simple sheet of paper into various crafts. As a rule, a square is used for this. This is the shape we need to take to create the next craft.
This master class presents the step-by-step manufacturing of a ship with a sail.
Let's prepare for work:
- square sheet;
- glue stick.
Let's start making a boat by folding a square in half in two directions. This will outline the required folds for further work.
Now we bend the lower and upper parts of the workpiece to the middle line.
The sides also need to be folded towards the middle.
To create the sides, you need to straighten the corners and give them a different shape. We begin to straighten the upper right corner, smooth its lower fold diagonally.
Let's smooth the top of the workpiece. This is how we formed one of the corners.
Likewise, expand the lower right corner.
The left side must be done in the same way. This is how we formed the sides.
In order for our craft to look like a ship, you need to take it with your hands and pull the halves in different directions - to the left from you, and the right to yourself. As a result, the workpiece should take the following form.
Turn the lower protruding corner to the right and place it horizontally.
In the bow, you need to glue a little, connecting the right and left sides together.
Our sailboat is ready!
You can go sailing not only in reality, but also in your fantasies. This is especially true for children who easily immerse themselves in the game, imagining themselves as various characters. If a child dreams of the sea and imagines himself as a sailor, then to support his imagination, one cannot do without a boat with white sails, made using the origami technique. In this master class we will show you how to make it.
To create such a boat with sails, you only need a square sheet of colored one-sided paper, we used blue.
First, fold the square in half.
After that, we perform another transverse fold. As a result, our square with folds turned out to be divided into 4 equal parts.
Now we turn the workpiece over to the other side and do the diagonal addition.
Then we fold the square along the other diagonal and turn it over to the front side.
Turn the workpiece over again with the white side up and bend 2 opposite corners to the center.
Now we need to start shaping the sails. To do this, we begin to make a fold inward on one side.
You need to fold it so that a vertically located white triangle forms on top.
We do the same with the other side. As a result, we see that 2 white sails are visible.
But one of them needs to be slightly reduced. To do this, fold the right sail down.
After that, bend it up, while forming a small fold.
Fill the resulting fold inward. Now our boat has white sails.
Its lower part must be bent to the opposite side.
From the front side, our sailboat looks like this.
Our boat with white origami sails is ready.
How to make a manigami boat from a paper bill
The model of the boat presented in this master class is quite simple. What is it notable for in the first place? Made from a real banknote. This is a manigami boat. This article will help you remember how to fold an origami boat. This is a good old way of folding, a very popular one that every child should know. The resulting boat can even float on the water, but only if you do not feel sorry for the bill. Let's consider the stages of modeling in stages.
Materials required for work:
- banknote;
- ruler for smoothing paper.
How to fold a boat out of money in stages
The banknote you have prepared must be folded twice in height, that is, bend the rectangle in half, first combining the longer sides, then the shorter ones. Flatten the paper and unfold. The center cruciform line is a label for further work.
Bend the workpiece across so that the face stays inside. Now bend the side where the fold is visible with a house, closing the two upper corners in the center.
Turn the resulting house over to you. Leave the upper corner (a kind of roof) unchanged in the future, you need to work with the rest of the paper (with a kind of walls). Lift the bottom layer up, aligning with the base of the isosceles triangle.
Lift the other side in the same way. The two square parts of the bill will be bent symmetrically, while the isosceles triangle will remain inside.
Bend the top layer back to its original position and start working on the bottom layer. First, lower one corner down, combine the bend line with the side of an isosceles triangle.
Then bend the second corner, aligning it with the second same side of the triangle (you are working with an isosceles geometric figure).
Do the same with the bottom. Now the bill is 2 identical isosceles triangles connected by bases.
Bend the workpiece in half to form a multi-layered triangle. From the bottom, you can split it with your fingers. This is a kind of paper model of a triangle, which is known to everyone.
Bring your fingers inward from the bottom and stretch so that the resulting triangle looks like a square again. In this case, the model will become smaller and more multi-layered.
Pull back the side corners a bit, straightening the bill.
Bend the resulting square again to make the square even smaller.
Last time, stretch the sharp corners in the resulting workpiece to the sides so that you get a boat. In the center, you will see the right angle of an isosceles triangle. This is the roof of the previously folded house.
Manigami ship is ready. You can repeat the entire folding procedure on plain paper if you need to make a craft in a different color.
Now you know how to make an interesting souvenir with your own hands from real money. You can also buy souvenir bills to make just an imitation of manigami.
DIY boat for beginners
A paper boat is a great solution if a boy is growing up in your family. Especially if he is fond of the marine theme! Such a craft is very easy to create, you only need paper and 5-7 minutes of free time.
To make this boat, you will need the following materials and tools:
- a square sheet of colored paper with a side of 15-20 cm;
- scissors.
Step 1: make the first folds
Cut a neat square out of the sheet. If your sheet is initially square, you can skip this step.
Fold your square in half horizontally.
Expand. Now fold the bottom of the sheet towards the center line.
Fold the top of the sheet to the center line.
Fold the craft along the center line to the other side. You should have an accordion-shaped figure with 4 longitudinal folds.
Step 2: fold the corners. Uncover one side.
Fold the upper left corner to the center fold.
Fold the right corner to the center fold, symmetrically to the left.
On the other hand, also fold the corners to the midline.
Step 3: expand. Now fold the craft in half.
Uncover it. You have a boat, but it still needs to be trimmed.
To do this, turn the "bow" of the boat on one side to the central fold. Iron the folds well.
Wrap the "nose" on the other side to the center line as well. You should have a hexagonal shape.
Fold the opposite corners of this hexagon symmetrically by about 0.5 cm.
Expand the craft.
Fold the "side" part on one side to the central fold. Repeat on the other side.
Press the corners well inside the boat on all four sides. Thanks to this, the lower part of the craft will look very neat.
Expand. Align and straighten where required.
Your origami paper boat is ready!
Origami boat
How to make such a boat? Really very easy! All you need is a square sheet and 10-12 minutes of free time.
Such a cute origami is perfect for crafts with children of primary and secondary school age.
Materials and tools:
- square sheet 15-18 cm;
- scissors.
Cut 4 squares from A sheet.
Fold in half horizontally.
Expand. Fold one half of the sheet towards the center fold and unfold.
Fold the other half of the sheet to the center line.
Iron the fold gently, then lift the paper up and place it on the next third fold. Make a neat fold.
Place the craft vertically.
Fold the top right corner to a vertical crease.
Fold the upper left corner to a vertical fold.
Fold the left corner again. Iron the fold gently with your fingers.
On the right side, also fold the corner forward one more time.
Change position. Fold the entire bottom edge to the horizontal mid line.
Change position again. Fold the lower right corner to the horizontal midline.
Fold down the entire top section in the origami area where you are currently working.
Flip to the other side.
Accordion fold the paper over the area to be worked on twice. You should stop exactly at the center line of your square.
Lay the workpiece in front of you so that all formed folds are at the bottom on the right side.
Fold the upper left corner to the previously made vertical fold.
Fold the upper right corner to a vertical fold.
Wrap the corner again from the upper right side, and again from the upper left side.
Change position. On the opposite side, bend the bottom corner to the middle line.
Fold the top side down to the middle line as well.
Fold the entire upper part down along the middle line.
Uncover one side.
Fold the corner symmetrically to the corner at the back of the craft. Put the paper back in its place.
On the other side, also open one fold. Fold the second corner symmetrically to the existing corner.
Close the paper. Open the craft in the middle.
DIY paper origami boat is ready!
A boat made of colored paper
This most popular summer-themed craft can be done not only using the origami technique. In this master class I will show you how to make such a bright sailboat out of colored paper.
Necessary materials:
- colored half-cardboard in red, yellow and blue tones;
- skewer;
- glue;
- scissors;
- ruler;
- marker;
- pencil.
Create a sailboat skeleton. To do this, take a blue half-cardboard and cut out two identical strips measuring 18 x 2.5 cm. 
We divide each strip with a ruler and a pencil into three equal parts. We bend in those places.
We glue the two parts of the base of the boat together along the sides.
Next, let's create a small part of the ship's deck. We use the blue semi-cardboard again.
Cut out a small rectangle. We measure 1.5 cm from the sides for gluing.
We bend along vertical lines and glue the part in the middle of the ship between the bases.
Now let's prepare a wooden skewer and two pieces of yellow paper of different lengths to create the sails.
Create small holes in each rectangle. We insert a skewer through them.
Cut out a small square from a red sheet. We glue it to the deck. We make a small hole in the diameter of the wide part of the skewer. We insert.
Now we cut out a beautiful flag from red paper that will flutter in the wind. Use a black marker to underline the contour lines.
We glue the flag on the topmost point of the sailboat.
Draw the portholes and other important details on the paper boat with a black marker.
A wonderful paper boat is ready for sea voyages! The deck can accommodate small toys of pirates, sailors and the ship's captain.
How to make an applique - paper boat
Another craft option.
How to make this one, see here.
Original options for folding the ship - video tutorials
Origami ship with sail
How to make a boat out of paper
Original sailboat
Video tutorial on folding the ship
Almost all schemes for assembling paper boats are not complicated. And with a little practice, you can make them without a diagram. Today there is a great variety of different options for assembling sailboats that a child of any age can master. To do this, you will need various training materials, which today are presented in the form of diagrams, instructions and videos.
This exciting activity will delight not only kids but also adults. With the onset of spring, children quickly run to the street in order to play, letting their paper fleet sail. Made from simple materials, they become a simple and accessible game.
Read how to do it here.
