• We sew a fluffy maxi skirt with our own hands: a simple master class. Maxi skirt: who suits and what to wear it with

    09.10.2019

    There are never many beautiful skirts. Instead of wasting precious time endless shopping and fitting, you can sew the skirt yourself. You don't need to be an experienced seamstress to do this, even beginners can handle some models. Connect your imagination and create your perfect skirt yourself.

    Necessary tools and materials for a skirt without a pattern

    • The cloth.
    • Sewing machine.
    • Threads.
    • Centimeter.
    • Scissors.
    • A bar of soap.
    • Wide elastic band.
    • Lightning.

    Skirt-sun without a pattern

    To create a romantic and feminine look, you cannot do without a sun skirt. This cut accentuates a thin waist and helps to hide excess thighs.

    To make a skirt, we need only one measurement - the waist circumference. We lay out a piece of fabric on the table surface or directly on the floor. Draw a circle in the center with a piece of soap - here will be the waist. To find out the radius of this circle, you need to divide the waist circumference by 2 * 3.14.

    Now measure the length of the skirt from the edge of the small circle, add a few centimeters to the seam allowances and draw a large circle - this will be the bottom edge. Cut out the workpiece. We sew the bottom edge on a typewriter or manually, and attach an elastic band to the top. That's it, the skirt is ready.

    Skirts-sun, made not from a circle, but from a square, look original. The principle of sewing is the same, only instead of the outer large circle we draw a square with a side of 120 cm.


    Pencil skirt without pattern

    To quickly sew an elegant pencil skirt, we need any skirt that fits well to the figure as a template. It is best to use a soft fabric that stretches well. Knitwear is ideal.

    Fold the fabric in half. We apply a template to the seamy side and outline the contours with a piece of soap. You can make any length of the product, the main thing is that the waist / hip proportions are preserved. The workpiece can now be cut.

    To make the skirt narrower, it should be approximately the same width at the waist and at the bottom. Therefore, we measure the half-girth of the waist along the lower edge of the fabric and draw a vertical line upward. We cut off the extra wedge along it. Now we combine the slices and sew them on a typewriter.

    Cut off a piece of elastic to the length of the waist. Sew the ends with an overlap of 1.5 cm.Apply the elastic to the upper edge of the skirt and attach it. Now it remains only to hem the bottom edge and you can try on a new thing.

    Summer skirt to the floor without a pattern

    For sewing, we measure the circumference of the waist, hips and the length of the skirt. Now you need to decide how lush it will be. For a not very lush hip girth, you need to multiply by 1.3-1.5, for a lush one - by 1.6-2. The resulting number will be the required width of the fabric for sewing. And the length will be equal to the length of the skirt + 6 cm for allowances.

    Now we sew the side seams, and do not overlap the top to the end, so that you can pull the elastic into the belt.

    Tuck the upper edge first by 1 cm, and then again by the width of the elastic. We sew near the first fold. We have got a drawstring where you need to pull the elastic. After that, we cover the side seam to the end and process the bottom of the product.

    The finished skirt, if the color and style permits, can be decorated with beads, embroidery or ribbon flowers. This will further emphasize the originality of the skirt. Improve your skill, draw interesting ideas online - and new clothes will never run out in your wardrobe.

    If you decide that you will sew a fluffy maxi skirt, then the most important thing is to choose the right fabric: it should be dense, only in this case the pleated skirt will be voluminous. The best for sun skirts and voluminous maxi skirts is dense heavy satin, a more expensive material is mikado fabric (silk).

    How to understand how much fabric you need for a skirt: on average, a voluminous pleated skirt will need 2 to 3 meters of fabric if your clothing size is from 42 to 46.

    You will also need a secret lock, threads to match the fabric, and sewing tools, of course.

    We sew a fluffy and voluminous maxi skirt according to the pictures

    First, take your measurements:

    • measure your waist;
    • step back 5 cm from the waist and also measure the girth (by the bones);
    • measure the length from the waistline to the hemline of the future skirt.

    Step 1:


    Cut two rectangular cuts from the fabric (back and front). Piece length is the length of your skirt + seam allowances. Cut out semicircles on both sides of both pieces - future pockets. They should be directed slightly downward, the hand should fit in there. Typically, pockets are made 20 cm below the waistline.

    Step 2


    Mark the center of the part across the width to fold in. There will be 4 pleats on each side of the skirt. First fold two folds to one side, then two to the other - they should be even and slightly sloping, not parallel to each other. Pay attention to the receiving width of the waistband and the hip line so that the underwired skirt fits neatly and does not bulge.

    Then fold the same folds into the second back of the skirt.

    Step 3

    Sew the folds as close to the edge as possible to keep the seam neat. It is better to use a slow speed on a sewing machine for this.

    Step 4



    Fold both skirt pieces right side in and sew along the edges (including the pockets). Do not sew a seam over one of the pockets - a secret lock will be inserted there.

    Step 5

    Measure your skirt to make sure it fits you. And only then sew a zipper into the cut.

    Step 6

    Cut a strip from the main fabric with a length equal to the waist circumference + allowances, about 10-15 cm wide. Attach it with the right side to the front side of the skirt and sew from one edge of the zipper to the other. Then fold this belt inward along the seam and iron. Sew the edges around the zipper. From the back side, this piece of fabric can be simply left free, or fixed on the tucks of the folds, but only so that it is not visible from the outside.

    Step 7

    Fold up the hem of your maxi skirt, press and sew.

    That's all, you are great - you yourself sewed a fluffy maxi skirt with your own hands. Of course, this is a simple and not the most flawless option, but it will be perfect if you urgently need a festive skirt.


    Fluffy maxi skirts are now in trend - they can be worn not only for a social event or holiday. great for summer walks or going to work.

    Sewing a simple skirt to the floor will not be difficult even for a novice craftswoman. After all, you can do without a pattern, it will be enough to make just a few measurements. In this article, we will analyze in detail what and how to measure, how to cut out the details and sew. For those who do not want to mess around with building a drawing, I offer ready-made free patterns for a long skirt, which can be downloaded at the end of the article.

    How to build a floor-length skirt pattern

    First, we need to decide on the fabric. It is desirable that it be stretched in the transverse direction. Otherwise, the skirt will hinder movement.

    Required measurements:

    • Waist circumference,
    • Hip circumference (optional measurement, needed for checking),
    • Length from waist to outside of foot.
    • Step length (needed so that the skirt does not hinder movement).

    With the first three measures, I think there should be no questions. But in order to measure the length of the stride, or rather even say the circumference, you need to take your usual step and measure the circumference with a centimeter tape, clasping the ankles.

    On a fabric folded in half, set aside a quarter of OT on top, for example, if your waist is 68 cm, then you will need to set aside 17 cm + a seam allowance.

    Set aside the length along the fold line, for example 90 cm.From the resulting point, set aside a quarter of the circumference of the step. So, if your measurement of this value was 88 cm, then you will need to postpone at least 22 cm.Of course, you can measure more, but if you take a smaller segment, keep in mind that walking in a skirt will not be very comfortable. To rectify the situation, we will have to make an incision, but we sew without it.

    Finally, check to see if the skirt is tight at the hips. To do this, measure about 18-20 cm below the waist and measure the width in this area, it should be at least a quarter of the circumference of your hips. In case you have a narrow waist and very wide hips, you will have to slightly increase the waist mark, and increase the width of the lower segment by the same amount.

    Method number 2. According to the method of Marlene Mukai.

    Marlene Mukai proposes to build a pattern for a long skirt, taking the hip circumference as a basis. Below are drawings of such skirts. We see that initially a rectangle is drawn, the width of which is a quarter OB. We measure a quarter of OT from above, and another quarter of OT is laid down from the edge of the rectangle. The edges of the skirt need to be slightly rounded. In my opinion, Marlene Mukai's patterns are one of the most accurate and at the same time simple. By the way, all measurements in the drawings are indicated taking into account allowances. Size chart below.

    How to sew a maxi skirt

    Cut out the details of the pattern. Place them right side to side and sew side seams. Hem the hem.

    For the top, cut a strip of fabric that is OT long and about 20 cm wide.Fold it in half and sew to the top of the skirt. If you have very wide hips, and the fabric is not elastic, then you can cut a strip longer, and then insert an elastic band into it or stitch rubber veins.

    Other options for maxi skirts

    Here are some more options for long skirts. The size chart for these drawings is the same as for the patterns by Marlene Mukai.



    Skirts are suitable for absolutely every woman, and age and complexion do not play any role in this. Skirts that have the maximum length are always in trend. When wearing such skirts, a woman looks attractive and charming, since maxi skirts can emphasize the seductive curves of a woman's figure, which makes the male half of humanity look around and stare at passing beauties in such an outfit. In our article we will look at how to sew a maxi skirt with your own hands.

    How to sew a maxi skirt?

    Sewing a maxi skirt is not particularly difficult, but in any case, you will have to spend some time and put in a little effort. Since the skirt is long enough, you need to sew it carefully, without any flaws, otherwise it will deteriorate appearance products. The cut of maxi skirts is almost the same, but you can create interesting models that will visually differ quite strongly from each other.

    To sew this product, you must prepare the following materials in advance:

    • fabric with a knitted base;
    • an elastic band that is used for clothing;
    • tape measure;
    • scissors used for fabric;
    • threads of a suitable color;
    • sewing machine or needle and thread;
    • sewing pins;
    • pencil or tailor's chalk.

    Taking measurements

    Before you start sewing a maxi skirt, you need to take the appropriate measurements:

    • We measure the circumference of the hips. To do this, you need to measure the volume of the hips with a measuring tape, which corresponds to the girth of the widest part of this part of the body. The tape should be parallel to the ground as you wrap it around your hips.

    Important! At the time of taking measurements, slip thumb under a measuring tape, so that in the end the product does not turn out to be too small.

    • After that, you need to measure the waist circumference. To do this, measure the waist circumference with a centimeter tape, or find the area where the belt from the skirt is usually located for clarification. You must decide in advance on the model and specify how high the belt of your self-made skirt will be located.

    Important! Your natural waistline runs along the narrowest area of \u200b\u200byour body, which is usually at the level of your belly button. To avoid a tight belt, it is necessary to slip your thumb under the measuring tape when measuring the waist circumference.

    • Now you should determine the length of your product. To do this, measure the distance from the point of the waist to the ankles or to the area where you will have the end of the skirt with a measuring tape.

    Important! For all maxi skirts, the length, which is measured to the ankles, is the standard. There are models of maxi skirts in which the length varies from the ankle to the calf, which is also the “maxi” length.

    Preparing the fabric

    Let's consider how not to make a mistake in choosing a fabric for sewing a maxi skirt:

    • The purchase of material on a knitted basis is the most ideal option for a simple and comfortable product. The knitted fabric is able to stretch a little, which is important when worn.
    • You should choose a dark color scheme or a dense enough fabric so that the made skirt does not show through, otherwise you will have to wear another underskirt or make a lining. In the summer and hot autumn days, it is not very convenient.
    • When you are in the store, try to determine how far the knitted fabric of your choice stretches. The best option is knitted fabric, which can stretch by 25-40%.
    • When choosing a fabric, pay close attention to an important nuance - whether the fabric can stretch in all directions. This must be taken into account, as over time your product may become much longer and you will have to shorten it.

    Important! You should not type a knitted fabric with a margin at that moment if you accidentally made a mistake with the cutting or with the calculation the required amount material. Typically, a maxi skirt will need from 1.35 to 1.85 m of fabric.

    • You also need to purchase an elastic band, which should be designed for sewing clothes. The width of the elastic should be about 7.6-8.0 cm.
    • Before you start cutting and sewing knitwear, you need to wash and dry the fabric. This procedure will avoid unnecessary shrinkage of the fabric during washing in the future.

    Important! In order for a sewn maxi skirt to serve you for a long time, you must adhere to the recommendations for caring for a product made of the selected knitted fabric.

    Cut

    Consider the process of cutting and sewing a maxi skirt:

    • It is necessary to fold the knitted fabric in half. In this case, it is imperative to monitor the location of the shared thread so that the elasticity of the fabric is not compromised and that the material is stretched in the right direction.
    • Fold the fabric with the right side inward.
    • The rows of knit stitches should be horizontal from one edge to the other, but never vertical.
    • Now you need to set aside the top point and mark the bottom of the future product. The upper section of one of the two main elements of the pattern should be equal to half the width of the waist, plus 2.5-4.5 cm for seam allowances.
    • In this case, the lower part of the product should be 30.5-35.5 cm wider than your waist. Thus, taking into account the folded knitwear in half, the bottom of the cut part should be 15.5-17.5 cm wider than the top.
    • All details of the skirt, as well as the upper, lower lines, must have vertical symmetry.
    • Parts should be marked with a washable marker or tailor's chalk.
    • Connect lines between the top and bottom of the product. Thus, the sides of the skirt are formed, which will diverge from the top of the product to the bottom.

    Important! If, during cutting, you manage to lay out the knitted fabric in such a way that one side line is located strictly along the fold line of the material, then you can spend less time on sewing, since the number of seams is halved. If the drawing cannot be tilted normally to the fold of the knitted fabric, then the product is cut out with two side seams.

    • If the pattern is built correctly, then you can start cutting out the details. To do this, you need to chop off two layers of material and cut out two parts that have trapezoidal shapes using tailor's scissors along the drawn lines.

    Important! For smoother cuts, you can use a cutting mat and roller knife. The fabric should be cut very carefully so as not to stretch it. If the material is stretched during cutting, then the cut parts are deformed.

    Sewing:

    1. Now you need to sew the side seams. With the folded parts facing inward, the sides need to be sewn from top to bottom, while it is necessary to retreat from the cuts about 1.25 cm.
    2. At this stage, you need to check the waist line. To do this, try on the product. If the waist is large, then you need to stab the excess fabric and lay new seams. If the waist is small, then you need to open the seams a little and lay new ones.
    3. If you are sewing on a sewing machine, you need to set the straight stitch. If you do not have a sewing machine, you can sew by hand using a “back needle” seam for greater strength.
    4. Now it remains to hem the bottom of the skirt. To do this, it is necessary to wrap the bottom edge of the product by 2.5 cm, having previously swept up the fold before sewing. You can sew the bottom edge of the maxi on a sewing machine. If using a manual hem, you can use a back seam or use a different stitch to hem.

    Sewing on the belt

    Let's consider step by step how to sew a belt on a maxi skirt:

    1. Cut out the fabric for the belt. The material for the belt should be exactly the same length as the waist with an additional 2.5 cm for the seam allowance.
    2. It is necessary to check that the share thread matches the share thread on the product.
    3. The piece of material for the belt should correspond to a width of about 25.4 cm.If you fold the piece in half, you get 12.7 cm.
    4. Sew the elastic into the belt. We pin the elastic to the inside of the belt. To fix it, we stitch it along right in the middle.
    5. The length of the elastic should be about 2.0-2.5 cm shorter than the waist, but when stretched it will reach the size of the waist. If you take an elastic band of the same length as the waist, then when worn, it will not hold on to the waist, since the product will be very loose.
    6. When sewing on the elastic, stretch it to match the ends of the belt material.
    7. Now fold the belt in half and sew. After that, we fold the front half of the belt to the side to which the elastic was sewn. We lay a line along the cuts of the material, after which we connect the belt using a line in a ring.
    8. When folding the belt in half to form a ring, the wrong side should be outward. The stitch should be sewn 1.25 cm from the edge of the cut. After that, you need to turn the belt over your face, thus hiding the seam allowances.
    9. Then you need to sew the belt to our product. To do this, with the wrong sides, you need to attach the belt to the upper part of the skirt and sew on a sewing machine.
    10. The connecting seam of the belt must be positioned so that it lines up with some side seam of the product.
    11. Remember to leave a 1.25 cm allowance when you sew.
    12. We turn the product onto the front side, while the belt must be turned upwards.

    We sew a fluffy and voluminous maxi skirt

    Consider how to sew a fluffy and voluminous maxi skirt model.

    First you need to take measurements:

    1. measure your waist;
    2. retreat 5 cm from the waist and measure the girth by the bones in the same way;
    3. measure the length of the made clothes, which corresponds to the length from the starting point located on the waist line to the bottom of the future skirt.

    Consider the process of making a future product:

    • Cut out two rectangular pieces of fabric from the material, which correspond to the front and back. The length of the fabric is the length of your garment plus the seam allowances.

    Important! We cut out semicircles on both sides of the two parts, which will later be pockets. In the direction they are located slightly below, and they should be large enough for the location of the hands. Basically, pockets are placed 20 cm lower than the waistline.

    • Next, mark the center point of the pattern in width to form the folds. There should be 4 folds on each side of the skirt. First you need to lay 2 folds in one direction, and then two in the other direction.

    Important! The folds should be slightly sloping and even, but not parallel to each other.

    • After that, you should make exactly the same folds on the second part, which corresponds to the back of the maxi skirt.
    • We sew the folds very close to the edge of the product, in this case the seam looks neat.

    Important! If using a sewing machine, use a slow speed.

    • We fold both patterns with the front sides and sew along the edges, we also sew the pockets. We do not sew a seam over any pocket, since there will be a secret lock in this place.

    Important! First you need to try on your future clothes so as not to be mistaken in the size of the waist. Only then can a zipper be sewn into the cut.

    • In order for the product to lay down neatly on the bones and not puff up, it is necessary to pay attention to the line of the hips and the width of the belt being made.
    • We cut out a strip from the main material that corresponds to the length of the waist circumference and plus allowances of about 10-15 cm. We apply the front side of the cut out part to the front side of the product and sew from one edge of the secret lock to the other. Next, fold the belt inward along the seam and iron it. Sew up the edges near the zipper. From the seamy side, this piece of material is simply left free, or it can be fixed on the tucks of the formed folds so that it is not visible from the outside.
    • We bend the bottom of the manufactured product, iron it and sew it on a sewing machine.

    Your self-sewn maxi skirt is ready.

    How to sew a maxi skirt from an old dress?

    Consider the option of a sewn product without a preliminary pattern. Any novice needlewoman without special skills can very easily and quickly sew a maxi skirt, while she does not need to purchase special fabrics.

    In order to independently make an interesting outfit, we need:

    • a dress that has long gone out of fashion;
    • an old T-shirt that matches the color scheme;
    • scissors for fabric;
    • sewing pins;
    • pencil or tailor's chalk;
    • sewing machine or needle and thread.

    Consider the manufacturing process:

    1. In the dress, you need to cut off the top that matches the length of your future skirt. If the model of the dress has darts, then you need to cut off below the darts line.
    2. Further in old t-shirt cut off the bottom processed edge.
    3. Then you need to cut off the middle part of the shirt, which is about 25-35 centimeters wide.
    4. After that, you need to measure your waist size. In the case of wearing a skirt on the hips, use the size of the hips, which should be halved and set aside on the workpiece. A line should be drawn with a pencil or chalk, then chopped with sewing pins and stitched on a sewing machine. Cut off the rest of the material.
    5. Thus, you have formed a belt for the future product. Next, fold the workpiece in half so that the front side is outside.
    6. After that, you need to put the top of the future outfit inside the belt and connect in such a way that the raw edges of the belt and skirt are in a circle. The side seams of the future skirt should be aligned with the side seams of the belt.
    7. In this article, we have offered you several ways to sew a maxi skirt, and you should make sure that they are all simple. Other options are also not particularly difficult, so you can choose a model of your choice and act, creating new things for yourself!

    Maxi skirts have become especially popular over the past few seasons, and for good reason. Versatile and amazing feminine model will help out in any life situation: she is good at work, and on a walk, and on a romantic date. Whether it is a meeting with the girlfriends or the groom's parents, a long skirt will look elegant, expensive and appropriate.

    Such clothes require special attention to themselves, are not suitable for rainy weather and long trips to public transport: in this case nice outfit quickly get dirty and lose all its charm. Before putting on a maxi skirt, you need to carefully consider the image so that it looks holistic, harmonious and complete.

    Who are the skirts to the floor

    A maxi skirt suits everyone, without exception, the main thing is to choose the right style. Overweight ladies should choose models with a high waistline and combine them with shoes with a stable heel of medium height. In this case, a skirt with a low waist should be discarded, as well as flounces, frills, pockets and other jewelry in the hip area.

    For petite girls, it is recommended to wear maxi paired with high heels to balance the silhouette. Materials and shapes can be anything: translucent or heavy, chiffon, velvet, wool, flared or form-fitting. There are no restrictions for tall and slender ladies, they can wear any style and combine with any footwear that suits their style and lifestyle.

    What to wear with a long skirt

    A maxi skirt from women requires a special attitude, so you need to choose the rest of the outfit very carefully. For a voluminous, wide skirt with a fluffy hem, either a tight-fitting top or a wide, but shortened, waist-length is suitable. A slim maxi can be paired with oversized shirts and sweaters. The multicolor pattern harmonizes beautifully with monochromatic things, and vice versa, the monochrome bottom looks good with patterned T-shirts and blouses.

    When choosing an outfit, it is necessary to pay attention not so much to the skirt itself, but to the integrity of the entire image, its compliance with a single style. Shoes can be any, suitable for the weather and lifestyle: elegant stilettos, stable heels, and rough shoes with grooved sole.

    What materials to choose

    To make the skirt flow beautifully and "play" while walking, choose light, airy materials: chiffon, thin cotton, natural or synthetic silk, satin or even tulle. Many people think that this style is only suitable for summer, but designers fashion clothes came up with great options and for cold weather: thanks to the warm lining of soft wool, chiffon skirts can be worn even in cold weather.

    If you prefer narrower, form-fitting models, you should consider knitwear: it is elastic enough not to create difficulties when walking, and at the same time it fits nicely to the body, creating a sophisticated silhouette. For evening outings, dense satin, jacquard shimmering with satin sheen, luxurious velor or sophisticated lace are suitable.

    Maxi skirt for every season

    The long hem is relevant for any season. Therefore, it is worth considering in advance what to wear with a maxi skirt in each season. In the summer, wear it with knitted T-shirts and T-shirts, silk tops, light blouses. In autumn and spring, maxi looks great with classic sweaters, decorated with various braids, tight-fitting turtlenecks, long-sleeved T-shirts.

    Leather and denim jackets, as well as bombers, which have not lost their popularity for a dozen years, are perfect as outerwear. In winter, a maxi skirt is recommended to be worn with long cashmere coats, cropped sheepskin coats or sheepskin coats. There are no restrictions on the height of the heel, so wear shoes that you feel comfortable in.

    Evening dresses with a long skirt

    A long skirt is much more democratic than an evening dress, and it costs much less. Thanks to the matching top, this outfit is easy to adapt to any special occasion. For the evening, wear maxi made of chiffon, silk, lace, velvet. The choice of style is at your discretion: flared skirts, year skirts, and narrow models with high seductive cutouts will be appropriate.

    An excellent companion will be a simple velvet top with thin straps in black, purple, chocolate, navy blue or pink. For youth, informal events, you can try on a bold blouse embroidered with sparkling sequins.

    Maxi skirt and office dress code

    It is permissible to wear such a skirt to work, but only if the office does not require a business dress code or smart-casual style. In all other cases, floor length is only welcome. For work, pair the outfit with form-fitting turtlenecks, discreet jersey tops with long or short sleeves... T-shirts with straps and fashionable blouses with open shoulders are strongly discouraged. Maxi skirts in an office setting look unusual, elegant and incredibly stylish. So be sure to save a few for the new season if you haven't already.

    A maxi skirt suits almost everyone without exception: tall and petite girls, fat or thin, mature or very young. She makes the image more serious, elegant, feminine and infinitely beautiful. The main thing is to choose a harmonious ensemble, in which the details competently complement each other, balance the silhouette and do not create imbalances. Explore photos with a maxi skirt and choose the combinations that best suit your style and lifestyle.

    Similar articles