04.01.2024

You can make your own gift boxes from colored paper (or a suitable design printed on a printer) and cardboard or cardboard with a New Year’s print already applied. Use New Year's symbols to decorate your gift - Christmas trees, snowflakes, stars, sparkles, bows and more. Then the gift wrapping will be bright and elegant.

Gift box “Snowflake”

An original detail is a snowflake on top of the gift box. Making such packaging with your own hands will not be at all difficult.

You will need:

"> cardboard or thick paper;

">stationery knife;

scissors;

glue.

Print out the box template and cut it out with scissors.

Transfer the diagram onto cardboard. Mark the fold lines indicated in the figure.

Using the back of a utility knife, draw along the fold lines - this will allow you to bend the cardboard more accurately.

Glue the corners of your box by gluing the triangle protrusions to the sides of the “snowflake”.

When the glue has dried, close the finished box, placing one snowflake element on top of another.

Another version of the snowflake box

Decor ideas forDIY gift box

If the plain white color of a gift box seems boring or too plain to you, decorate the packaging with glitter. To do this, coat the snowflake with glue (a glue stick is best for this) and sprinkle generously with glitter. After 5-10 minutes, blow off any excess glitter.

Rhinestones on a sticky base are also perfect for decorating the box. Decorate the box to your liking by simply gluing rhinestones onto cardboard.

Instead of regular white cardstock, use silver or gold colored cardstock.

Template for the Christmas tree box

DIY triangular Christmas tree box

This packaging represents the main symbol of the holiday - the New Year tree - sparkling and elegant!

For such a gift box, you can not print the template on a printer, but draw it yourself using our measurements.

You will need:

decorative corrugated cardboard (green);

gift ribbon (golden);

scissors or stationery knife;

rhinestones, stars, ribbon decorations, etc. - in general, everything you can decorate a gift box with.

Draw a template on plain paper.

Transfer it to cardboard and cut it out.

Gently press the dotted lines for the fold using a thin, non-sharp object (such as a knitting needle or a non-writing pen).

Fold the sides of the box along the resulting dotted line.

Place your gift in the center and gather the edges of the box with the seams facing inward.

Once all four edges are aligned, tie the ribbon around the gift wrap as follows: For the bow, fold the ribbon in half not once, but twice, and only then tie it into a knot.

Straighten the ribbons onto the bow and attach a decoration of your choice on top. These can be red or gold beads, decorative stars, etc.

Glue star rhinestones onto the box itself or draw snowflakes with a gold marker.

DIY gift boxes: templates

For children's gifts, you can use these bright and beautiful templates. Your little one is sure to love a giant candy cane filled with their favorite sweets!

Homemade stamps for New Year's packaging

Create your own exclus useful boxes for gifts with your own hands, attaching for e All it takes is a little effort and your rich imagination!

Modern gift boxes can be made from a variety of materials, or you can use already convenient containers that can simply be decorated.

There are so many creative ideas that everyone can easily find the best option. You can use, download templates or use ready-made boxes and containers. It all depends on your desire and capabilities.

At the initial stage, you need to decide who you are going to give the gift to. If it’s for a child, then it should be bright colors, with a variety of decorations and decorative elements. An adult will be satisfied with models that are more original and restrained in style, without unnecessary details. Thus, everything depends on you and on the implementation of your idea. Next, it’s worth taking a closer look at several main types of homemade gift wrapping.

Gift boxes from templates

Currently, on the Internet, you can find a huge variety of stencils and templates of the most creative options. All you need to do is download and print the details. If the project is quite large, several sheets will be needed. Next, using the received stencils, we cut out finished parts from selected materials. In this case, gift cardboard is perfect. We apply all folds correctly and glue them along the marked lines. As a result, you will get a rather beautiful package that can be decorated with a ribbon.

The use of stencils and templates comes down to one technique, so if you use templates for DIY gift boxes, then follow the instructions. As a result, you will get an excellent and creative craft for storing New Year's gifts.

Making a box from beer cardboard

Beer cardboard is a porous material that has a dense structure and an interesting appearance. Using this material, you can create packaging for New Year gifts that your boyfriend or friends will like.

To complete the work you will need:

Porous packaging cardboard (beer cardboard)
Stationery
Scissors
Glue
Decorative materials (ribbons, paints)

That is, when you go to the park, you can pick up pine cones or twigs and stick them on the lid. The most important thing is not to overdo it, as the paper may not withstand the load.

Nowadays you can find any type of gift template online, the most important thing is to look for what you need and in accordance with the age and interests of the person to whom the gift is intended. Based on the presented methods, you can easily achieve the desired result and create an interesting gift wrapping model.

Another wonderful and very detailed master class from a true professional -. Such New Year's box in the shape of a house in itself is already a wonderful gift, and if it also comes with sweets, and with a surprise...

“In this master class we will make an unusual gift for the New Year - candy house. This house is not simple, but also has a compartment where you can put the main gift. So, when the recipient eats all the candies, he will discover that, as it turns out, New Year's gifts continue to pour in! You can put not only candies, but also other sweets into this box house - it all depends on the taste of the person who will become its owner. Moreover, the house can be used as New Year's decor and.

New Year's gift box "House"

To assemble the structure of the house and work with the material we will need:

cardboard 3 mm thick;
white Whatman paper;
PVA glue;
stationery knife;
scissors;
glue gun;
masking tape;
glue brush;
paint brush;
white acrylic paint;
hole punch or grommet tool;
pencil;
cutting mat;
figured hole punch-border.

For decoration we will need the following materials:

napkins for decoupage or regular ones with a New Year's print;
decorative paper for gluing the inside of the house;
white cardboard;
lace;
twine;
large bead;
satin ribbons;
half beads;
whole spices: cinnamon sticks and star anise;
the rest of the decor is made of artificial materials.

Creating a house- this is a very easy process, and here you can show your imagination at full speed. The main thing is to cut out all the parts evenly, then assembling the structure and decorating it will not be difficult. If you do not have any of the materials or tools used in the master class, then alternative options will be provided, so do not be discouraged if you do not find sticks in your local store.

In the master class, ordinary napkins with a New Year's print are used to cover the surface. The walls of the box are pasted over in a darker color, and just one napkin was enough for the whole house. But for the roof, napkins are used on a white background, which is why the surface is painted over with white acrylic paint, since the cardboard is dark in color and will be illuminated otherwise. So pay attention to the color of the cardboard and napkins for pasting. If there is a chance that the color of the cardboard will spoil the whole look, then it must first be covered with white Whatman paper or painted.

To cover the inside of the house, you need to choose decorative paper that is very similar to a napkin and that can be easily glued with glue. This kind of paper can be bought in flower shops, etc. In the master class, the paper looks like a very thin transparent layer of felt.

Preparing parts for the base of the house

In order for the edges of all parts to be smooth, it is better to cut them to fit the ruler with a stationery knife. If the cardboard you use is less than 3 mm, then it is quite possible to cut it with scissors.

We draw on cardboard and cut out all the details.

In the case of the side walls: first we cut out rectangles with dimensions of 15.6 x 15 cm, then along the edge 15 cm long we mark the middle and lower the perpendicular with a height of 4 cm. We draw this all out and cut off the resulting corners, which follow the shape of the roof.

Cut out the parts for the roof.

Assembly of the structure

We begin assembling the house from the side walls and bottom. We will fasten it with hot glue, so we need to work very quickly so that it does not have time to harden. Hot-melt adhesive can be replaced with Moment Crystal glue.

Apply a layer of glue along the edge of the side with a length of 15 cm along the surface that faces up. The bottom should already be on the cutting mat and we quickly place each side against the edge of the cardboard, while forming a right angle. We place both walls opposite each other.

Internal joints must be sealed with masking tape to make the structure more durable. When gluing, we form right angles.

Pasting the walls of the house

Now we proceed directly to gluing the outer walls first. The ¼ size napkin is just the right size for the wall, so all four pieces will be enough to cover the entire exterior. It is convenient to divide the napkin into two parts to cover two walls at once.

We remove the layer with the pattern we need from the napkin.

Apply a thin layer of PVA glue with a brush. If there is a lot of glue, the cardboard may bend during the drying process, and the napkin may tear when gluing.

If you don’t have a cinnamon stick and couldn’t make a hole in the cardboard, then you can simply glue a bow on top of the lid, with which you can also open it.

Decorating the house

When the roof has dried, you need to attach it to the house, but first we will punch it with a border hole punch and cut out two strips, each 21 cm long. We glue them using hot glue along the inner side edges of the roof.

We decide where the front part of the house will be and where the back will be. We will attach one part of the roof just to the back. We apply glue along the top edge to only one half and fasten one side of the roof, placing it so that there are equal allowances on all sides.

The upper joint on the roof can be covered with tape by gluing it only along the edge of one part of the roof.

We decorate the house at our discretion. You can create a composition from whole spices and artificial decoration. We decorate the roof with half beads and lace.

Since the napkins depict a bear with a Christmas tree and gifts, for greater effect you can decorate the tree with beads, glue a real bow to the bear and make a gift out of cardboard. You will get a 3D effect.

Instructions on how to use the house

Open the lid and you get a regular box...

But at the bottom we put a New Year's gift for a loved one...

Cover it with a lid...

We fill the house up to the ceiling with sweets and you can safely give such an original gift! It would be great if the keys to a real house were at the bottom!

It’s so simple, but painstaking, you can do it yourself New Year's gift!

In order not to forget the page address and share with friends, add to your social networks:

Everyone loves to receive gifts for the New Year. Both children and adults.

And the gift begins with the packaging.

Even without knowing what kind of gift there is, we are already intrigued.

And if the design is also beautiful, then the heart begins to beat joyfully, even before seeing what’s inside.

You can come up with the simplest boxes.

Sometimes you just need to wrap a gift in pretty paper and tie it with a ribbon.

You can present a gift with the symbol of the upcoming New Year.

Or you can pack a gift in the form of a Christmas tree.

Master Class

And for holiday boxes and materials you will need nothing at all: a color printer or printer paper, preferably colored, thick paper or cardboard, scissors, glue and your imagination.

Great idea to make a box in the shape of a Christmas tree with your own hands. Such boxes are difficult to find on sale, but are easier to make yourself and decorate as you wish. There is an idea for a gift box.

First, we need to cut out such a template from cardboard for the box.

Here's what the already cut template looks like.

Now, you need to bend along the dotted lines, as in the photo

Glue the middle

and now, fold it as in the photo.

Here are the dimensions of our parts; you can make them larger or smaller if desired.

All that remains is to secure the top with a ribbon with a bow or make a beautiful flower out of the ribbon and tie the top of our gift box.

DIY Christmas tree box for a New Year's gift.

Wrapping a gift beautifully is a talent. A Christmas tree-shaped Christmas tree box will greatly facilitate your question: how to give a gift beautifully. Children will especially be pleased to receive a gift in such a Christmas tree.

Using the template shown in the photo below, we cut out the future Christmas tree box from cardboard. We turn it over with the colored side down (if the cardboard is colored on one side), and at the ends we make holes for the ribbon with a hole punch. Fold the box and tie it with a ribbon.

I got it here.

Another option for a Christmas tree box:

We cut out two halves from which we will fold the box. Note. they are different.

We fold them as shown in the photo.

To make a box in the shape of a Christmas tree, just take an A3 sheet of paper and draw a square on it using a ruler. Then draw elongated triangles on four sides and add even waves to make a connection along them.

There are four holes at the top, decorate with soft watercolors, glue on rhinestones or cover with sparkles, connect the edges, and the tops with a beautiful ribbon on which to hang a name. The final option is to place a gift inside and place it under the tree.

Photo schemes:

In preparation for the New Year, you can make original gift boxes in the form of trays. It’s both interesting and cheap in terms of money, and you can also attract children to handplay.

So, we need:

Double-sided cardboard
Lucky template
Ruler
Square
Scissors
Pencil
Rubber
Ribbon

Step 1

We take the Christmas tree template and draw it on cardboard, so that there are ears on the sides and so that our future box is symmetrical.

Step 2.

We apply our blank to the cardboard and trace it with a pencil. The bottom part will be the bottom of the box.

Step 3.

At a right angle with a ruler and a square, we outline the template on one more side.

Step 4

As a result, you should end up with a pattern like this.

Step 5.

Carefully cut it out, erase the pencil with an eraser and glue the joints of the Christmas tree.

The end result should be a box like this. Which you can then decorate to your liking.

I would like to suggest making you such a simple and at the same time very interesting gift box in the form of a cute New Year’s box:

This box is made of green cardboard. All we need is to first draw the figure shown in the picture on the back of the cardboard, and then bend, glue and cut it, after placing the gift.

And here is another option for the box holder:

We also draw and cut out, all that remains is to glue it together, putting in the gift.

Here's what it looks like on paper:

We make gift wrapping in the shape of a Christmas tree from thick colored paper.

The proposed options are simple; even a less skilled person can master them.

The main thing is to first make an appropriate stencil on plain paper, according to which you can cut out the future packaging from wrapping paper. You can also use gift paper with New Year's themed pictures as wrapping paper - it will be even more original.

Good luck in your work!

For those who don’t particularly want to strain themselves, the photo below offers a simpler option: fold the gifts in the shape of a Christmas tree and tie them with a beautiful ribbon.

The simplest, classic and unoriginal option: create a box that is familiar to everyone, the shape of which would repeat the silhouette of a Christmas tree, and not an abstract rectangle. Its appearance will be like this:

We take this stencil and cut out the tree itself from cardboard in 2 copies (the lid and bottom of our box):

Based on my experience in creating similar crafts, upon completion of the work, the box needs to be decorated with wrapping paper and ribbon to give it a decent look and disguise all the flaws.

For friends and family, and have already bought it, you might want to wrap it up nicely. You can make original packaging for any gift with your own hands, and it’s not at all difficult.

You will need a few simple things (colored paper, glue, scissors, etc.) and a couple of interesting ideas that you can find here.

On our website you will also find:

Textile New Year's packaging

You will need:

Any cardboard packaging

Square piece of bright fabric

Bright ribbon.

1. Place your gift wrapping in the center of the fabric.

2. Tie the opposite ends together.

3. Gather all the ends into a bun and tie them with a bright ribbon.

New Year's wrapping paper packaging

You will need:

Wrapping

Scissors

Scotch tape or washi tape (tape with a pattern)

Thread or tape.

1. Prepare a large sheet of wrapping paper and fold it in half. Next, turn it and insert one end of the paper into the other (see image).

2. Secure the structure with tape.

3. Bend the bottom 7-8 cm upward. After this, bend half of the folded part to form a hexagon.

4. Bend each end of the folded half towards the middle of the hexagon and secure with tape.

5. Make small holes in the top of the package and thread threads, strings or ribbons through them to create handles for the package.

How to make a bow for gift wrapping

You will need:

Colored paper or unwanted colored magazine

Scissors

PVA glue or tape.

1. Prepare a bright page of a glossy magazine (or a sheet of colored paper) and cut it into strips 2 cm wide and the following lengths: 3 strips 28 cm long, 3 x 25 cm, 2 x 22 cm and one strip 9 cm long.

2. Fold each strip to create a loop at each end (see image). Glue the ends with PVA glue or tape. Make a circle from the smallest strip.

3. Carefully begin gluing the strips one on top of the other, starting with the longest one. At the end, glue a circle from the smallest strip.

Beautiful packaging for New Year's gifts

You will need:

Simple paper bag

Corrugated paper in pastel colors

Scissors (regular or fringe)

PVA glue or glue stick.

1. Cut the corrugated paper into several strips of the same size.

2. You can cut the fringe and then partially glue the paper strips to the bag or vice versa, i.e. Apply a little glue along one side of each strip and stick them to the bag, then cut the fringe.

3. You can tie a tag with congratulations to the handle.

And here is an option with colored corrugated paper:

New Year's packaging for candies

You will need:

Wrapping

Small box or cardboard cylinder of toilet paper

Scissors

1. Lay out wrapping paper (large enough to wrap the box) on the table and place the box of candy on it.

* Try to cut such a piece of paper that after you wrap the box in it, there will be a lot of margin left and right.

2. Press the paper firmly against the box and secure it with tape.

3. Gently crumple the ends of the paper along the sides of the box and tie them with ribbon.

Men's gift packaging for New Year's gifts

You will need:

White and colored paper

Button

Double-sided tape

Scissors

PVA glue or glue stick.

Video instructions are attached below.

1. Place the gift box on a large piece of white paper.

2. Wrap the gift in paper.

* To make the central part of the shirt, you can fold the paper towards the middle of the box and then bend its ends where the lines are drawn in the image. You can wrap the top part of the paper in the same way as the bottom or as shown below in the video (at 2:12 min).

Side view

* You can also wrap the paper in the usual way, secure its ends with tape, cut a strip from another paper, bend it and glue it to the main paper.

3. To create a collar, you can cut a wide strip of paper, fold it in half lengthwise and bend it so that it resembles a collar (see image).

The video shows another option for making a collar for such packaging (at 2:30 min) using double-sided tape and tape. The ribbon is then tied like a tie.

4. You can make a bow from thick fabric or paper.