home
Hobby
How to wash faux fur? Gentle cleaning of faux fur at home How to wash faux fur at home

How to wash faux fur? Gentle cleaning of faux fur at home How to wash faux fur at home

05.12.2023

The variety of fur today is impressive; now you can no longer distinguish faux fur from natural fur, so skillful have modern technologists become in their creations. To make fur look impressive and beautiful, you need to know the secrets of its care; in this article we will look at how to wash faux fur.

What is faux fur?

A pile made of chemical or natural fiber is attached to a knitted, woven or leatherette base in different ways. The pile can be smooth-haired, with a printed pattern, melange or imitating the color and appearance of the fur of an animal. Each type of faux fur is produced by a specific type of machine and application technology.

Faux fur has both advantages and disadvantages. Let's consider the main positive features and distinctive features of faux fur from natural fur:

moths do not grow in chemical fibers;
no need to kill animals;
has a low cost;
sewing a product made of faux fur is not difficult;
lighter in weight;
more durable;
does not deteriorate;
You can make fur of any color and shade;
I don't mind throwing it away.

Negative qualities:

retains heat worse;
may shrink if washed frequently;
sheds;
the woven base weakens from washing: the pile spills out;
The fur rolls and falls off over time.

Washing faux and natural fur differs significantly. Faux fur can be washed, but you need to follow some washing rules. But with natural it will be more difficult, since the base is impregnated with animal fat, which gives the skin elasticity and protects against excess moisture penetrating into the interior. If you wash an item made of natural fur with a regular wash, the fats are washed out of the skin, it dries out, becomes deformed and bursts, so in the end you can say goodbye to your favorite item.

Before washing your faux fur, please read the following guidelines:

Try to wash by hand.
Use large containers for washing.
Use ones designed for washing delicate fabrics.
Wash only in warm water.
To avoid fur matting, do not rub the product.
Pay attention to worn and more contaminated areas.

How to wash fur at home?

We suggest you carry out the process of washing fur at home in stages. Follow these guidelines.

Stage 1 - preparation

Knock out any dust from the reverse side of the product.

Step 2 - Selecting a Cleaning Product

Before applying any product or solution, test for strength:

Apply a few drops to the base of the fur.
Wait until the product is absorbed.
Pull the base in different directions, if it does not stretch or is deformed, start washing.

Stage 3 - washing

If you decide to machine wash, follow these rules:

Roll the product with the front side facing inward.
Load the item to be treated with an old pillowcase or linen bag and sew it up.
Use liquids for washing wool and silk fabrics.
Turn on at minimum spin.
Add when rinsing.

Important! Please note that if the product is large, do not wash it in the machine, the fur will absorb a large amount of water and the drum may not be able to withstand it. It's better to take it to the laundry or dry cleaner. If this option is not suitable for you due to financial costs, then purchase.

Hand wash faux fur as follows:

Fill the washing container with warm water.
Dilute detergent for delicate fabrics or neutral hair shampoo without conditioner.
Soak the product for a while, depending on the degree of contamination.
Wash, alternately running your hand against the pile and behind the fur.

Stage 4 - Rinse

It is very important to know not only how to properly wash faux fur, but also how to process it further. Otherwise, the desired result will not be obtained. Considering the characteristics of fleecy material, be sure to adhere to the following rules when rinsing:

Rinse several times in warm water to thoroughly rinse out the detergent.
To make the pile fall into place and gain shine, rinse in cold water slightly acidified with vinegar.
Do not twist the product, squeeze it slightly
Place a stick or stool across the bathtub and place the treated item on it to allow the water to drain.

Stage 5 - drying

Faux fur also needs to be dried correctly. For this:

After the main part has been glassed, hang the fur item on strong wooden hangers or on a crossbar with the lint down.
Dry at room temperature, avoiding direct sunlight.
To prevent the lining from suffocating, periodically turn the lining outward when drying, and then vice versa.

Stage 5 - the final touch

While the cleaned item is drying, the fur must be combed several times in all directions.
Leave until completely dry.
Shake well and straighten.

How to wash light fur?

Before washing your faux white fur, look for yellow stains. They need to be removed, since they will still stand out against the general background of the cleaned item.

There are several simple ways to wash white fur. Choose the one that suits you, taking into account the necessary means and degree of contamination, and follow the instructions provided.

Method 1

If you are looking for the easiest method to remove yellowness from fur, use lemon juice or vinegar:

Wet the yellow stain with acid.
Brush lightly with a soft brush.
Dry.

Method 2

Use products such as semolina, starch and crushed chalk; for best results, warm them until warm.

Lay the product on a flat surface so that it is convenient for you to handle the product.
Distribute the bleach over all problem areas.
Rub the lint with your hands.
Shake it off.
Brush the fur.

Method 3

If the methods described above do not solve the problem, make a more aggressive stain remover yourself.

Mix equal parts water, ammonia and hydrogen peroxide.
Soak a sponge in the solution.
Go over the problem areas, following the direction of the pile.
Dry in fresh air.

Important! These methods can also be used for washing natural fur..

How to wash natural fur?

As we have already noted, natural fur is not treated with regular washing, but stains must be removed from it. Therefore, use one of the options below if you have a beautiful item made from natural pile.

Method 1

To remove dirt from the fur surface, use a soap solution:

Dilute dish detergent in warm water.
Spray the product onto the fur.
Brush off most of the dirt.
Rinse off any remaining product with a damp cloth.
Comb the dried, matted fibers.

Method 2

A mixture of ammonia and table salt will help you wash off greasy stains:

Prepare the following solution: mix 3 tbsp in 0.5 liters of water. salt and 1 tsp. ammonia.
Wipe oily areas with a sponge soaked in liquid.
Process long fur as you go, short fur against the direction.

Method 3

You can wash and refresh a fur item using detergents for delicate fabrics:

Dilute 2 tablespoons of the product in 1 liter of warm water.
Shake until foam forms.
Using a stiff brush, apply foam to the fur and wipe along the growth of the pile.
Rinse off with a clean damp cloth.

Method 4

To wash products made from nutria, beaver, otter and mole fur, use hot river sand:

Place the item to be cleaned on a flat surface.
Heat the sand to such a temperature that you can hold it in your hands.
Pour over the fur.
Rub the entire surface of the product, paying attention to the more contaminated areas.
As the sand becomes dirty, replace it with new one.
Shake it out.

Method 5

You can wash the long-haired fur of arctic fox, silver fox and fox using a comb with blunt, sparse teeth. Be prepared, the preparation for cleaning itself will take some time.

Before applying any cleaning method to your faux fur coat, you must read the manufacturer's recommendations, which are indicated on the product label. Very often, a fur coat needs to be dry-cleaned, for example, in cases where there is a printed pattern. However, many such fur coats can be given as gifts and at home.

So, there are two main ways to wash faux fur: by hand and by machine. The first option is suitable when the contamination is local in nature, or when you need to wash the entire item. Pre-soak the product in warm water with a mild detergent or soap solution. Wait half an hour and then clean the fur coat with a soft brush.

Also, some faux fur items are machine washable. It is important here that the water temperature does not exceed 40 degrees. Use the delicate wash cycle.

Remember, you can wash your fur coat no more than once a season.

After washing, the fur should be smoothed with a towel in the direction of the pile and then dried. Some precautions need to be taken:

do not twist your fur coat, just wring it out lightly, wrapping it in a towel;
dry your faux fur coat exclusively naturally – on a clothes rack;
do not place it on a radiator or on any other heating device - the fur may become deformed;
During drying, the product should lie flat;
the fur should be carefully combed in the right direction;

After it has completely dried, go over the fur with a brush with metal teeth - this will add shine and help fluff up the pile.

Washing a synthetic product by hand is the best way to clean it and maintain its original appearance at home. But this process also has its own characteristics.

How to wash faux fur without using an automatic machine? To complete a task, you must perform a series of actions in sequence.

Find a washing container that can hold the item. If the housewife plans to wash a collar or hat, then she will only need to place them in a basin with a solution of warm water and washing powder. If you plan to wash a large item, you will need to fill the bathtub.
The process of cleaning a faux fur product should be carried out at a temperature not exceeding 40 degrees.
After making sure that the water temperature is appropriate, the housewife should place the product in the water and leave it for 20–30 minutes. Places where the pile is very dirty can be squeezed with your hands. Rubbing or twisting synthetic clothing is not recommended.
Washed fur must be rinsed in clean water without applying much pressure. The procedure requires first using warm and then cold water. This will add shine to the product and effectively remove residual soap and dirt.

If the clothes are dirty only in one place, then it is better to refuse to wash the entire item. To clean a stain, take a cotton swab or pad and apply a soapy solution to it, then lightly rub the stained area. After the procedure, you should leave the item with the solution for 5–10 minutes, and then take a damp cotton pad or swab and remove any remaining detergent.

The easiest way to wash a hat, fur coat, hood or faux fur blanket at home is to wash it in a machine, which will do most of the work for you.

If you are absolutely sure that this method will not harm your things, it is important to consider several nuances:

Preferably, if you are using a washing machine that has a wash and spin setting, top-loading models usually have the best settings.
Choose the most delicate detergent possible, it is best if it is powders and concentrates for silk or wool.
To avoid adding problems to yourself, wash faux fur separately from the rest of your laundry. Even if you only need to wash one hat. If it is possible to remove fur parts, such as a hood, from items, do so and wash them separately.
Before washing, it is advisable to soak a fur item, such as a fur coat or blanket, and let the product act on it for about 20 minutes. Do not leave the fur on for more than half an hour to avoid damaging the fibers.
After 20 minutes of soaking, wash the item in the rinse mode for delicate fabrics at minimum speed, if none is provided, carefully wring out the fur by hand.
If possible, hang the wrung-out item on hangers, wait until water stops dripping from it and send it to dry in a well-ventilated place. It is important to protect the fur from direct sunlight.
While drying or after drying, gently comb the fur with a soft brush.

It is important for those who wear a fur coat or other item made from it to know how to wash faux fur by hand. Owners of long-pile faux fur clothing will have to wash their fur coat, coat or hat at home by hand. To carry out this procedure correctly, it is also important to take into account the sequence and correctness of the actions:

If you need to wash one or two stains from an item such as a bulky blanket, there is no need to wet it all. Wipe the stained area with a cotton pad soaked in a delicate soap solution. Leave for a while, no longer than 10 minutes, and wash the solution with a cotton pad moistened with clean water. Untidy stains will no longer spoil your blanket, but washing won’t require much effort either.
To wash something small, such as a hat or hood, use a small tank. If you need to wash something that won’t fit in any of the basins at your disposal, dilute a soap solution from washing powder or concentrate directly in the bathroom. The solution water should not be higher than 40°C. Soak faux fur clothes in it and leave for half an hour.
Before rinsing, you can lightly rub the fur with your fingers or a sponge in places where it especially needs washing. You need to rinse it very carefully so as not to pull the lint out of the base, first with warm water and then with cold water.
You must wring out the item carefully by hand, blotting it with an absorbent towel or material. After this, the clothes should be hung on hangers and sent to dry away from heating devices and direct sunlight.

How to wash fur correctly?

We suggest you carry out the process of washing fur at home in stages. Follow these guidelines.

Stage 1 - preparation

Knock out any dust from the reverse side of the product.

Stage 2 - choosing a cleaning product

Before applying any product or solution, test for strength:

Apply a few drops to the base of the fur.
Wait until the product is absorbed.
Pull the base in different directions, if it does not stretch or is deformed, start washing.

Stage 3 - washing

If you decide to machine wash, follow these rules:

Roll the product with the front side facing inward.
Load the item to be treated with an old pillowcase or linen bag and sew it up.
Use liquids for washing wool and silk fabrics.
Turn on delicate wash mode with minimal spin.
When rinsing, add antistatic agent for synthetics.

Hand wash faux fur as follows:

Fill the washing container with warm water.
Dilute detergent for delicate fabrics or neutral hair shampoo without conditioner.
Soak the product for a while, depending on the degree of contamination.
Wash, alternately running your hand against the pile and behind the fur.

Stage 4 - Rinse

Rinse several times in warm water to thoroughly rinse out the detergent.
To make the pile fall into place and gain shine, rinse in cold water slightly acidified with vinegar.
Do not twist the product, squeeze it slightly
Place a stick or stool across the bathtub and place the treated item on it to allow the water to drain.

Stage 5 - drying

Faux fur also needs to be dried correctly. For this:

After the main part has been glassed, hang the fur item on strong wooden hangers or on a crossbar with the lint down.
Dry at room temperature, avoiding direct sunlight.
To prevent the lining from suffocating, periodically turn the lining outward when drying, and then vice versa.

Stage 5 - the final touch

While the cleaned item is drying, the fur must be combed several times in all directions.
Leave until completely dry.
Shake well and straighten.

Stylish and affordable items made from faux fur firmly occupy first positions in the production of clothing made from synthetic fabrics. Almost everyone in their home has at least one item made from this material: a fur coat, a handbag, a hat and even a blanket.

Many housewives are concerned about the question of how to clean and wash faux fur clothes in order to preserve the structure of the fabric and not spoil their favorite item.

By following simple rules, it is quite possible to cope with washing fur products at home, without resorting to dry cleaning services.

1 Hand wash
2 Machine washable
3 How not to wash

Wash by hand

It is better to wash small items by hand

A product made of artificial fur fabric with long pile can only be washed by hand, while materials with short pile can easily be machine washed.

If you need to wash a small item, for example, a hat, mittens, collar or hood, proceed as follows. Not very hot water is poured into a container of suitable size, the temperature of which should not exceed 40°C, and liquid soap or gel is added.

It is not recommended to use dry washing powders or soaps with active chemical additives, as they can damage the structure of the pile. As a last resort, if only washing powder is found on the household, it must be separated from large particles and thoroughly dissolved in water.

After washing, the fur should be carefully combed

You should rinse your fur item in plenty of water, first warm, then cool. Before squeezing the product, you need to remove it from the water and, placing it on some kind of stand, allow the bulk of the liquid to drain. After this, you need to blot it with a towel several times, without twisting the material in any way.

It is better to dry clothes on hangers, away from radiators. After drying, the fur can be combed with a round-tooth comb.

You should not start washing large bulky items, such as a blanket, if the contamination occupies a small area. It is much easier to remove several stains using a gauze swab dipped in a soap solution.

Machine washable

With proper care, products will last a long time

Machine washing is acceptable for faux fur items with short, thick pile. Before loading items into the machine, you need to read the manufacturer's information on the label about the care requirements for this fur product and the possibility of automatic washing.

When starting to clean a fur product in a machine, you should follow several rules:

Before washing, it is advisable to soak items in warm water with detergent for 15-20 minutes. To avoid damaging the fibers, do not keep the fur in water for more than the specified time.
If you need to wash white faux fur, then before immersing it in a soap solution, you need to moisten a soft sponge in water with lemon juice and treat the fur surface with it.
From detergents, you need to choose those that are suitable for washing delicate fabrics, silk or wool.
It is recommended to wash synthetic fur separately from other clothes. If you need to wash the hood or collar, it is better to unfasten the parts and process them separately from the jacket.
After soaking, the fur clothes are loaded into the machine and washed in a mode for delicate materials at a water temperature of no more than 40°C.
It is necessary to squeeze the product at the lowest speed or manually.
The item should be dried on hangers, in a ventilated area, away from ultraviolet rays and heaters.

Faux fur requires special care rules. Only in this case will the pile remain shiny and fluffy for a long time. It is especially important to wash fur items correctly, following the instructions, and remember which operations fur absolutely cannot tolerate.

Faux fur cannot be heated, as at high temperatures the synthetic fiber can become deformed.
Do not dry fur items in a machine or dryer. After drying with hot air, the item will probably be irretrievably lost.
Do not treat synthetic fur with bleaches, stain removers or other chemicals that have an aggressive effect on the fiber.

You need to handle white fur with particular care and attention. Due to the wrong choice of detergents, a white fur coat can become yellowish in color, and the long pile can get tangled and break.

By following these simple rules, you can perfectly wash faux fur yourself at home, without resorting to dry cleaning services.

Not everyone knows how to clean faux fur at home. Attempts to remove stains by hand or in a washing machine are not always successful. Often, after washing, a product loses its decorative qualities. The fur becomes dull.

Its villi stick together, mat and look shaggy. Dirt attaches to the pile and eats into the soil fibers. If the base of the faux fur is made of cotton fibers, then after washing it may shrink.

Correct cleaning will help restore the product to its purity, preserving all its qualities.

If the faux fur becomes covered with dust during storage, it can be knocked out. To do this, the item is laid out on a damp, clean cotton cloth, pile side down, and beaten with a carpet beater. During knocking, the dust accumulated between the fibers will settle on the damp cloth. After cleaning, the product must be dried flat.

Faux fur item

If after knocking out dirt remains on the pile, it can be removed with a soap solution. For this:

The product is hung on hangers so that the surfaces to be cleaned are in a vertical position.
In 1 liter of warm water (35-40°C) you need to add 2-3 tbsp. l. neutral shampoo (transparent, without additives or dyes). Beat the solution with your hands until a fluffy foam forms.
The foam is carefully applied to the pile using a brush. In this case, it is necessary to avoid contact of washing liquid with the base of the fabric.
Fur with long and medium pile should be cleaned only in the direction of its growth. Products with short fibers (1-2 cm) are cleaned in the opposite direction. This is the basic rule for cleaning faux fur products.
After applying the foam, its excess must be removed with a damp cotton knitted cloth, wrung out almost until dry.
To dry the item, wipe it with a clean terry towel. After this, the product is placed in a well-ventilated room or outside to dry. It should not be exposed to direct sunlight. Heating devices should be located at a distance of at least 1.5-2 m from wet clothes.
Dried pile must be combed with a metal comb with wide teeth. It is better to use a special iron needle comb.

IMPORTANT TO KNOW! Do not cut “fungal” nails! Nail fungus is treated like this: treat your nails with regular...

To make the fur shiny, crumbly and fluffy, it should be treated with a mixture of ethyl alcohol, water and glycerin. To do this, 0.5 liters of ethyl alcohol are mixed with 0.5 liters of water and added to the composition 1 tsp. glycerin. The liquid is sprayed onto the pile from a spray bottle or carefully applied with a cotton swab. When the product dries, it is combed again.

How to wash light fur?

Before washing your faux white fur, look for yellow stains. They need to be removed, since they will still stand out against the general background of the cleaned item.

There are several simple ways to wash white fur. Choose the one that suits you, taking into account the necessary means and degree of contamination, and follow the instructions provided.

Method 1

If you are looking for the easiest method to remove yellowness from fur, use lemon juice or vinegar:

Wet the yellow stain with acid.
Brush lightly with a soft brush.
Dry.

Method 2

Use products such as semolina, starch and crushed chalk; for best results, warm them until warm.

Lay the product on a flat surface so that it is convenient for you to handle the product.
Distribute the bleach over all problem areas.
Rub the lint with your hands.
Shake it off.
Brush the fur.

Method 3

If the methods described above do not solve the problem, make a more aggressive stain remover yourself.

Mix equal parts water, ammonia and hydrogen peroxide.
Soak a sponge in the solution.
Go over the problem areas, following the direction of the pile.
Dry in fresh air.

Removing greasy stains

You can get rid of greasy stains on faux fur using gasoline. It copes well with this kind of pollution.

Take a cloth and soak its edge in purified gasoline, squeeze it out so that the gasoline does not drip, and then treat the stain. Remember, so that the stains do not rub and their area does not increase, you need to move from the edges of the stain to the center, and not vice versa. The procedure can be repeated several times until the stain disappears. Afterwards, wipe the stained area with a damp cloth and dry the product. It is advisable to do this in the shade on the balcony so that the smell of gasoline disappears faster.
There is another practical method for cleaning faux fur from greasy stains. You need to mix refined gasoline and potato flour to form a thick paste. Then the resulting mass is applied to the stain and left until the gasoline evaporates completely. After this, you need to shake the fur and clean it from any remaining flour. To do this, apply heated starch to the stain and rub thoroughly. The flour will be easily removed from the fur along with the starch.

How to wash natural fur?

As we have already noted, natural fur is not treated with regular washing, but stains must be removed from it. Therefore, use one of the options below if you have a beautiful item made from natural pile.

Method 1

To remove dirt from the fur surface, use a soap solution:

Dilute dish detergent in warm water.
Spray the product onto the fur.
Brush off most of the dirt.
Rinse off any remaining product with a damp cloth.
Comb the dried, matted fibers.

Method 2

A mixture of ammonia and table salt will help you wash off greasy stains:

Prepare the following solution: mix 3 tbsp in 0.5 liters of water. salt and 1 tsp. ammonia.
Wipe oily areas with a sponge soaked in liquid.
Process long fur as you go, short fur against the direction.

Method 3

You can wash and refresh a fur item using detergents for delicate fabrics:

Dilute 2 tablespoons of the product in 1 liter of warm water.
Shake until foam forms.
Using a stiff brush, apply foam to the fur and wipe along the growth of the pile.
Rinse off with a clean damp cloth.

Method 4

To wash products made from nutria, beaver, otter and mole fur, use hot river sand:

Place the item to be cleaned on a flat surface.
Heat the sand to such a temperature that you can hold it in your hands.
Pour over the fur.
Rub the entire surface of the product, paying attention to the more contaminated areas.
As the sand becomes dirty, replace it with new one.
Shake it out.

Method 5

You can wash the long-haired fur of arctic fox, silver fox and fox using a comb with blunt, sparse teeth. Be prepared, the preparation for cleaning itself will take some time.

Wrap the teeth of the comb with a thin layer of cotton wool.
Prepare a solution in a 1:1 ratio of medical alcohol and ammonia.
Soak the comb in the mixture.
Comb the fur in the direction of the pile.
Change the cotton wool until the contamination disappears.

White fur coat

Owners of designer fantasies are often tormented by the question of how to wash a faux fur coat. Let's figure out what it is. Let's lift the lining and look at the product from the wrong side. We will see a ribbed surface with small cells, similar to a knitted fabric. The conclusion is correct: synthetic skin is a knitted fabric into which pile is woven. Conclusion: the material will have the advantages and disadvantages of knitwear.

Knitted fabrics come in a variety of textures. Let's see what qualities fluffy joy is endowed with. A piece of fabric is sewn to the inside of the garment. We use the trim for testing. Let's look at the features of fleecy fabric. Extensibility is the main quality of knitwear. Let's pull the piece along, then across. It will give a stretch in one direction. This should not be forgotten when caring for your coat.

Let's check the piece for the strength of the weave. Let's pull the edge - the loops don't go down. Fur fabrics are treated with a special impregnation that prevents unraveling. All you have to do is carefully read the manufacturer's instructions and you can wash it.

We figured out how to wash a faux fur coat in a machine. What if the coat is white? It has become fashionable to get married in winter wearing elegant white sheepskin coats. After the wedding, the white fur outfit continues to delight the hostess. How to wash a wedding fur coat? Washing white fluffy joy is no different from fur of other shades.

For a fur coat that has changed color, we first return it to its original appearance. To do this, it must be placed on hangers and sprayed with a special solution. It is prepared like this: one tablespoon of hydrogen peroxide is added to a liter of cold boiled water. For spraying we use a spray bottle. Half an hour after processing, we place the product in an automatic machine. Lemon juice will also help restore color. It is diluted half and half with water.

Are there stains on your short fur coat? We get rid of them before washing. Lipstick stains can be easily removed with Vanish or another stain remover. Dishwashing foam will help remove grease stains. Apply the selected product to the stain, hold until it disappears completely, then rinse in running water.

The answer to the question of how to wash a faux white fur coat without spoiling it is simple. Care for the product in accordance with the manufacturer's instructions and the above instructions. Do not expose your fur coat to frequent exposure to water and detergents. Remember that the white cover is not intended for constant wear. If you pay attention to your favorite item, it will last you a long time.

A common problem for owners of white faux fur coats is the appearance of yellow spots on it over time. Fortunately, there are methods that will allow you to return the product to its whiteness even at home.

You will need water and hydrogen peroxide. Dissolve peroxide in water - 1 tablespoon of peroxide per 1 liter of water. Wash the product in this solution. It is better not to wet the base of the fur coat, but to treat only the fur with a brush. You can also add liquid to a spray bottle and spray onto the lint. After cleaning, dry the item following the drying rules for faux fur described above.

Potato starch will also help get rid of yellow spots. This simple and convenient method will allow you to quickly put your favorite thing in order. Thoroughly rub the starch into the pile, then shake the coat and remove the residue with a dry clothes brush. You can do this procedure for prevention. This way your white fur coat will please you with its excellent appearance longer.

IMPORTANT! Before using any cleaning products, especially chemical ones such as gasoline, be sure to test how the fur reacts to it. Apply the substance to a small, inconspicuous area. Remember, under the influence of gasoline, a thing can lose its colors and become discolored. Also keep in mind that gasoline is not suitable for cleaning products made from artificial astrakhan fur. Do not use acetone or vinegar to clean faux fur items, this will only harm them.

There is no need to try to scrape out the chewing gum, you will only pull out the villi, after which a bald spot will form on the fur coat, and the product will be completely ruined. Take ice from the refrigerator and put it in a plastic bag, then apply the ice to the gum for a while. Wait for it to harden when exposed to cold.

Cleaning rules

In addition to proper cleaning, to maintain a good appearance, faux fur items must be stored in accordance with certain rules.

Remember, in order for the fur to remain beautiful and fluffy, things need to be provided with enough free space. Do not try to hide your fur coat in a chest of drawers, a chest or a suitcase for the summer - the fur coat will wrinkle, and traces of folds will be visible on the fur.
Hang the fur coat on hangers that clearly fit it in size, and place it in the closet. Do not wrap the product in plastic film; you can use a cover made of natural fabrics (which allows air to pass through well) or paper.
The closet or dressing room where you store faux fur should be dry and clean. Make sure there is no unpleasant musty odor. If necessary, you can use natural flavors.
When taking an item out of the closet before the start of the season, knock it out with a bamboo cane. Lay the fur item on a sheet and walk over it with a bamboo stick. This will knock out the dust that has accumulated on your fur coat.
Fur must be kept extremely dry and clean.

When thinking about whether it is possible to wash artificial fur, the housewife should remember that the procedure for cleaning a synthetic product at home requires strict adherence to the manufacturer’s recommendations indicated on the label.

Regardless of the washing method, a number of conditions must be met.

Observe the temperature indicated on the label. Faux fur is afraid of heat. At high temperatures, the fibers of the product are deformed and the structure softens. A synthetic product may lose its smoothness or even melt.
Smooth the not yet dry pile with your palm. When washed, it may become matted and ruffled. After the cleaning procedure, the fur coat needs to be combed.
The pile must be air dried. But you should make sure that your clothes are not exposed to direct sunlight.

A few more important points...

Do you want faux fur to look beautiful, be fluffy and not fall off? Just comb it regularly with a comb that has sharp, preferably metal, teeth. This procedure should be carried out very carefully, while trying to touch the ends of the fibers without catching the base. There is no need to push the comb too deep into the fur.
If you often carry a bag over your shoulder or on your elbow, then where the strap rubs, the fur can get crushed and rubbed out. When putting on a fur coat, give preference to bags that need to be carried in your hands.
Remember, you should not attach various pins, brooches and other decorations to a faux fur coat.
Don't forget that faux fur really doesn't like exposure to high temperatures. Do not store or dry products in the sun, near a heater or radiator. Also, do not use a hair dryer for this purpose.
Ironing the fur or lining of a fur coat is prohibited.

Faux fur can be washed by yourself at home. This is one of its advantages. It is impossible to give universal recommendations for cleaning, because the synthetic fiber from which fur is made has different lengths and structures. The composition of the fibers is also different, and the use of the same product for different types of fur is unacceptable.

Pre-treatment of fur before washing

Before you begin directly washing the fur product, it is necessary to remove local dirt, dried and difficult to remove stains.

Types of pollution:

Yellow spots on white fur. The disadvantage of light-colored fur is its tendency to become covered with a yellow coating and lose its snow-white color. If local stains are visible that clearly stand out against the general background, then before washing the faux fur should be wiped with a cotton pad with a solution of hydrogen peroxide in the ratio of 1 tablespoon of liquid peroxide per liter of water. Try to walk only on the surface itself so that the solution does not go deep inside.
Heavy contamination of unknown origin. This could be dried chewing gum or oil perfume stains. A slurry is made from purified gasoline (sold in household goods stores) and starch. You need very few ingredients, a spoonful of one, a spoonful of the other. The mixture is applied to the dirt, rubbed in a little, and the fur is left to dry. It is better to do this on the balcony so that the smell of gasoline does not bother anyone. Then the fur is shaken off, and the pulp is knocked out of the fur.
Coarse fur on the cuffs. The fur on the folds (cuffs, collars) quickly wears out, wears out and becomes dense and hard. The situation will be corrected by 2-phase treatment using a salt solution and an oil emulsion. At the 1st stage, dilute 2 tablespoons of table salt in a liter of water. Apply the solution to the rough fur and rub it with your hands, moving in different directions. The procedure is repeated several times, after which the fur is wiped with an oil solution (100 grams of castor oil + 20 drops of ammonia and a liter of water). The application site is covered with cling film for 2-3 hours, after which it is removed and the fur is combed with a comb.
The fur was exposed to rain, was not dried well, and the pile lost its shape, began to curl and faded. In this case, treating the fur with an alcohol-free hair product with keratin will help. After the fur has been washed, it is dried, hair product is applied and combed with a comb. The fur will become smooth and shiny.

You can wash fur in a washing machine if it has thick and short pile. If the pile is long, mechanical washing will hopelessly ruin it. In addition, fur products cannot be dried in a centrifuge, otherwise it will become wrinkled and frayed.

Top-loading washing machines are better for washing fur. Fill the water halfway and add liquid detergent for silk and delicate fabrics. After 20 minutes, turn on the “rinse” mode. After the machine stops working, remove the fur. Do not twist it, let the water drain on its own. Lay out the fur on the ironing board. It’s better to place it on the balcony and turn the product over until it dries completely. When it reduces in weight, you can hang it by its hangers on a clothesline.

If you wash in a front-loading machine (round window), then you do not need to pre-soak. Select the “gentle soaking” mode and wait 20 minutes, no more. Then dry the fur.

How to properly wash fur by hand

It is preferable to wash fur items by hand. To do this, fill the bathtub with warm (not hot) water and dissolve liquid detergent. Even baby soap will do. The main thing is that it treats delicate fabrics with care, because the pile has a porous, fragile structure.

Squeeze the fur a little with your hands, but not too vigorously. Leave for 15-20 minutes. If you leave it for half an hour or more, the fur will develop color. Be careful!

Remove the fur from the soapy water. Drain the water and add clean, cool water. Rinse the fur. Make 2-3 passes.

After rinsing, wrap the product in a terry towel and squeeze through it. Place the fur in the bathroom on stools or a wire rack to allow the water to drain from it. Only after this do you take the fur out to dry on the balcony. You can comb it with a brush. To make the fur shiny, treat the surface with hair shine products.

Wash faux fur in liquid detergent. It has a delicate effect on fabric, enveloping the fiber, and can be used on silk or wool. Here are some good products for washing fur items:

VESTAR Washing gel. Carefully removes dirt and does not wash out the paint from the fur.
Liquid laundry detergent FLAT. Protects the fiber structure and does not wash out the color.
Alles Gut washing gel. Does not contain phosphates, does not damage fur.
Washing gel Dreft Delicates&Color. Preserves the shape and structure of the fur, protects the color from washing out.
Ariel Active Gel Capsules for washing. Delicate wash and excellent results.
Frosch washing gel. Makes fur soft and shiny.
Sodasan Cool washing gel. It is of organic origin and contains natural ingredients that care for the pile, just like hair.
Astonish washing gel. Does not contain chlorine and phosphates. The composition is similar to hair shampoo. The active components of the product were previously used in cosmetology. It will revive even the most “dead” fur.
Liquid gel Onyx Color. Has an antistatic effect. Maintains the shape of the product. Protects the fiber structure and makes the color brighter.

Follow the rules when washing fur items. Do not forget that fur should not be soaked for more than 25 minutes. Use liquid detergents. Do not twist the fur or hang it on a line immediately after washing.

Video: how to clean light fur

Faux fur looks very stylish, has a long service life and can decorate many products. You just need to take care of it with special care. Today I propose to figure out whether it is possible to wash faux fur in a washing machine and how to wash it by hand.

Before I tell you how to wash faux fur at home, I would like to mention a few words about this material. It has earned its popularity due to its durability, light weight, relatively low cost and lack of problems with moths.

Not sure what faux fur is made of? This is a fabric made of leatherette or knitwear, to which a pile of chemical fibers is attached. The pile itself can be:

smooth-haired;
imitating natural coating.

In order not to damage the fur product during the cleaning process, you must adhere to the following rules:

Photo	Recommendations
	Tip 1. No high temperatures It doesn’t matter whether you decide to wash your fur coat in a washing machine or wash the lint blanket yourself, the water temperature should not be too high. When heated, the fabric lining begins to soften and deform. Even if hot water does not harm it, there is a high risk that the pile will lose its shine.
	Tip 2. Dry carefully Once the faux fur wash is behind you, it needs to be dried properly. It is best to hang the fur coat on hangers and hang it in a place where there is no direct sunlight. Never use an electric dryer - it will negatively affect the quality of the fur.
	Tip 3. Additional processing Due to the fact that artificial hair has no direction of hair growth, it requires special care. After washing, you need to smooth the material with your palms, and after it dries, gently comb it with a soft brush.

Features of washing artificial pile

When your favorite fur coat or rug with long pile loses its former luster and is in dire need of cleaning, the first thing you need to decide is how you will do it - in the washing machine or by hand. The course of action will directly depend on this.

Machine washable: 3 nuances

Do you know if you can wash your faux fur coat in the washing machine? Carefully examine the product tag - you will find the information you need there. If the fur coat is voluminous and has long pile, then you will have to abandon the washing machine.

But for cleaning a hood, blanket or removable collar, a washing machine is just right:

Image	Instructions
	Detergent When washing items in a machine, use only liquid powders. Their price is higher than regular ones, but the pile does not stick together in the end.
	Washing mode It largely depends on the model of the machine. For front loading model It is best to choose the “Soak” mode. For horizontal loading machine Make sure that the water only fills the drum halfway. You can soak fur in the washing machine for no more than 20 minutes - otherwise it may deteriorate.
	Rinsing The last step in the question of how to wash a faux fur coat in a machine is rinsing. At the same time, it must be delicate. If the device does not have such a mode, you must wring out the product manually.

Hand wash: 3 aids

Most often, fur is processed manually at home. It's easy to do, just:

Fill a deep container with water.
Dilute liquid powder for delicate fabrics in warm water (not higher than 40 °C).
Soak the product for 20 minutes.
Wash the material, alternately running your hand against the pile and in the opposite direction.

This instruction is suitable if you just need to put things in order and
refresh the appearance of fur. If there is a need to remove serious stains, you cannot do without additional products:

Image	Instructions
	Alcohol and potato starch A similar combination is used to remove greasy stains from the pile on the collar that appear during its use: Mix both components until a thick paste forms. Apply the mixture to the stain. Wait 10 minutes. Remove any remaining dirt with a brush.
	Soap solution It is most convenient to use if you need to remove a couple of small stains from a large item (a blanket, for example): Prepare a weak soap solution. Soak a cotton pad in it. Rub the stained areas. Wait 10 minutes and rinse the fur with clean water.
	Vinegar or lemon juice Is it possible to wash fur with acid? This is possible only if it is light, otherwise you risk lightening the dark fibers: Gently wet the stain with citric acid or vinegar. Lightly rub the treated area with a soft brush. Dry the product.

Bottom line

I told you how to properly care for faux fur so as not to spoil it. You will find even more practical tips in the video in this article. Describe your questions on the topic or your own cleaning methods in the comments.

How to wash faux fur at home - in a washing machine or by hand? It must be remembered that items made from faux fur are cut out from whole pieces, and not sewn together from small pieces, like items made from natural fur, so they are not in danger of coming apart at the seams because the fibers become brittle during washing.

But even with faux fur you have to be very careful when trying to wash it. It’s not a good idea to start washing if the pile is long, if a pattern is applied to the product, and you need to remember that fur is afraid of hot water and aggressive drying. In most cases, it still needs to be cleaned rather than washed. Faux fur also has the following nuance: it does not have a specified direction of the pile, so immediately after washing, so that the fibers do not puff up in all directions, when the fur dries, it must be smoothed with your palms.

Can faux fur be washed in a washing machine?

If you decide to wash your fur item in a machine, then this should be the most gentle wash. Owners of machines with vertical loading may be more confident about the results, because... their programs are less intensive.

Wash your fur with liquid detergents that you would normally use on the most delicate fabrics. And don't forget to add conditioner. You can wash it with a simple powder, but there is a risk that it will not be rinsed properly.

It is important that during washing there is nothing else in the drum except fur. It is better to turn the thing inside out.

How to wash a faux fur blanket

A cozy, soft faux fur blanket will become very heavy when wet, making it difficult to wash by hand. A washing machine will be quite capable of doing this, the main thing is that the product can be wet cleaned.

Before washing, shake out the dust from the blanket. You can use a vacuum cleaner. This will improve the quality of cleaning. Select a suitable program for the most delicate washing, for example “Hand Wash”, but turn off the spin cycle. It is optimal to wash such a blanket at a temperature of 30 degrees.

When choosing a detergent, it is better to choose a liquid one, because... grains of powder often get stuck deep in the fibers and are difficult to rinse out.

Faux fur is highly electrified, so after washing it must be rinsed with an antistatic agent.

To remove water from a washed blanket, do not twist it. Let it drain first, then wrap it in a large towel to absorb excess moisture. Then lay it out on a drying rack, or hang it on a fairly thick and smooth bar. Do not dry on a line to avoid kinks that will be difficult to get rid of later.

How to wash a faux fur coat

Although faux fur is not as afraid of moisture as natural fur, you should wash a fur coat in water only as a last resort, when regular cleaning no longer leads to a neat appearance. Fur coats with long pile fur or with a pattern should not be washed at all, especially by machine.

If the manufacturer allows you to wash your fur coat in a machine, then choose the mode, temperature, detergents, and drying rules the same as for washing other faux fur items.

Wash fur coats that do not have very short pile by hand. Fill the bath with cool water. Pour the required amount of washing gel, whip up a light foam and lower the fur coat into it. Let it soak for half an hour. After this, change the water to clean water and rinse the fur coat. Repeat rinsing if necessary. Then add water again and add antistatic conditioner. Rinsing in this water will give your fur coat softness, shine, and eliminate static electricity.

Hang your fur coat to dry. When the water has drained, smooth the pile with your palms. Leave to dry naturally. Comb the fur.

How to wash a faux fur hat

Whether a faux fur hat has long or short pile does not matter; it is better to wash it by hand. Do not twist or stretch. Wash carefully with liquid detergent in cool water. Shake off the water and place on the dryer. Pay attention to the lint after washing. Smooth it down with your hands. And when the hat is dry, comb the pile.

If white fur has acquired a grayish or yellowish tint over time, the color can be refreshed by treating it with a peroxide solution. Dilute a tablespoon of hydrogen peroxide in a liter of water. Pour the solution into a spray bottle. Hang the fur coat over the bathtub and treat the fur with peroxide from a spray bottle. Then wash the fur coat using the method chosen according to the manufacturer’s recommendations. Instead of peroxide, you can use lemon juice diluted in half with water. After washing, to return the whiteness to the faux fur, it can be blued.