Bulky knitted hats with knitting needles are an undoubted and undeniable trend in winter fashion, and all because such a thing is practical and universal. Correctly chosen shape of the hat will correct any face shape and suit women different ages... In this master class, we will look at knitting patterns for several options for hats for every taste, which will be within the power of even those who have recently been knitting!
Bulky hat with braids "Rainbow mood"
This type of hat has been at the height of fashion for many years! We offer you to knit a spectacular and stylish beret hat, which will not leave its owner unnoticed. Hats, knitted in two threads, become very voluminous and warm - this accessory is perfect for the winter!
It should be borne in mind that it is knitted in 2 threads, at first - just one-color, and then we will replace one thread with a p-zhu of a different color, a little later - we also replace the second, thus, making a smooth transition from one color to another.
The difficulty of knitting is average, but if you are even a little familiar with knitting and follow the pattern, you will succeed!
We will need:
- gray wool [color A] (100% wool, thread thickness: 250 meters per 100 grams) - 2 skeins;
- pink p-Ms [color B] - 2 skeins;
- cn. No. 6, No. 4.5;
- auxiliary cn .;
- jersey. needle.
The product is designed for a head volume of 52 cm (stretches a little), the height will be 24 cm.
Description
In our case, we are preparing two skeins of gray yarn, we will knit with knitting needles from each ball separately. At the very beginning of work, we need a cn. No. 3.5, on them we string 132 p., And after - 2 p. elastic band 1 x 1 p.
After that we change the joint venture. on number 6 and take on the pattern according to cx., not forgetting to perform the reductions, as indicated on it. We continue until the product is ready by a third, after that we cut off one of the threads of the main color and instead of it we add p-zhu of a contrasting color (in our case, pink), then we knit another 10 rubles in the same way.
Then, we should cut off the remaining gray p-zhu and enter another pink instead of it (in total we have 2 pink ones), we continue to work with knitting needles according to the scheme for another 50 rows. Everything is almost ready! We just have to cut off the p-zhu, leaving a long tail, thread it into a knitted needle, pierce all the remaining stitches and carefully pull off and make a connection. the seam.
Takes with knitting needles with a cross braid
The following knitting techniques have been used:
- Kerchiefs: l. and and. R. - l. etc., in a circle. R. alternately 1 p. l. and and. P.;
- Front surface: in a circle. R. - l. P.;
- K. on 22 p.: According to the scheme, in and. R. etc. to do according to the picture or designation. Repeat from 1st to 8th p.;
- K. for 10 p.: In a circle. R. according to the scheme, in an even circle. R. - according to the picture. Repeat from 1st to 6th p.;
- Columns without a crochet: each c. R. start with 1 air. n. lifting instead of the 1st st. b / n and finish 1 connection. Art. in the air. n. lifting;
- relief pattern: in c. r. - Art. b / n, but in turn in each c. r. we introduce the hook into the front wall of the item, then into the next. to .. p. in the back wall of p.
Description
We string a light gray p-zhu on the cn. No. 5, we do 24 sts and do it between cr. a braid of 22 sts. Having made 52 cm in this way, we close all sts. The typesetting and closed edges we have to sew. Along the lower right side edge of the braid, you should tie 3 cr with a dark gray stitch. R. from 63 st. b / n .. Along the upper left side edge of the braid we work in dark gray 3 cr. R. from 63 st. b / n.
Next knit light gray embossed pattern... After 5 cm from the change of patterns in the next. cr .. p. evenly subtract 9 sts (knit together every 6th and 7th sts). Repeat 4 more times in every 2nd cr. p .. After 11 cm from the change of patterns, pull off the remaining p. of the working p-zhe, sew on a fur pompom.
Hat made of thick yarn: video master class for beginners
Voluminous hat for autumn with knitting needles
Required Techniques:
- Front surface: l. R. - l. n., and. R. - and. P.;
- Plaid in .: l. R. and and. R. - out. p-lami .;
- Elastic band 1 x 1 p.: Alternately 1 liter. n., 1 and. n .. I. p. - according to the picture .;
- Openwork knit: according to cx. 1. On cx. persons are indicated. R., out. R. - according to the picture. All rivers are indicated in height;
- Fantasy knot: according to cx. 2. On cx. persons are indicated. R., out. R. - according to the picture. All rivers are indicated in height;
- All the time - yarn in 2 ply.
Description
We use light gray yarn, we type 104 stitches with it, and then 2 cm we make an elastic band 1 x 1 stitches, after - a fantasy knot. by cx. 2. Through 15 cm from the typesetting p. evenly in every 3 p. you need to close 20 points, while on the cn. 5 sts will not remain, then pull them off and make a back seam.
Chunky Krentu Braided Hat
Knitted casual hats will suit absolutely everyone: they will fit both a sporty look and a romantic one, both for a teenage girl and for a middle-aged woman. Its indisputable advantages are warmth, it is simple to perform and will be completely ready in 2-3 hours!
We will use:
- volumetric p-M (50% alpaca, 50% wool, 40 m per 100 g.) - 200 g.;
- set of cn. No. 10 and No. 12;
- auxiliary cn .;
- marker for p.;
- knitting needle.
The size of the finished product is 54-56.
Technique
Scythe: we remove 2 p. On vp. cn., 2 l. n., then 2 liters. item with auxiliary cn.
Description
First, we need to type with knitting needles. No. 10 40 p., Then place a marker and connect the first and last p. Then we knit according to the following scheme.
1 cr .: * 2 l. n., 2 and. P.; rep. from * to the end of cr ..
2-6: as 1st circle; in the 6th, add evenly 9 p. = 49 p.
Next, change the knitting needles to number 12 and knit the pattern with braids.
1: rep. 7 times.
2: as 1st.
3: [braid, 3 and. n ..] rep. 7 times.
4-6: as 1st.
Repeat until 6 stitches have been completed, then decrease as follows: 7 times. Then 7 times = 35 p.
It remains only to cut off the p-zhu, pull the remnants of the "tail" with a knitted needle through the remaining p. And pull them off the wrong side. The new stylish winter accessory is completely ready!
We have given you several examples of patterns according to which you can make knitted hats to your taste. We hope you find the information provided useful.
Plain beanie made of thick Nako yarn
Knitted hats for women: schemes, descriptions, modern models
Three reasons why you need to learn how to knit hats with knitting needles:
First: today in stores it is difficult to find a knitted hat made of natural yarn. In the best case, it will be semi-wool with 50% acrylic, but alpaca or merino wool with an admixture of silk, alas, you will not find 100%. But in stores, you can easily buy wool with the desired composition and knit a hat for yourself without synthetics.
Second: it's all about the style. To find a hat model that suits you, you need to go around all the shops in the city, are you familiar with this? Isn't it easier to buy yarn and knit a hat with your own hands according to the description from the site? The Kolibri website contains many modern models of knitted hats with descriptions in Russian.
Third: knitted hat with knitting needles is perfect gift to someone you love. To mom or grandmother, brother or sister, dad or dear husband: knitted hat With knitting needles with your own hands, it will give them a piece of the warmth of your hands, and at the most opportune way it will help to express care for loved ones.
I wish you light stitches and successful knitting with the Hummingbird site!
A chunky knitted hat and a section-dyed scarf harmoniously complement each other, warming and adding a sense of comfort for their wearer. The multi-colored range of the presented wardrobe item makes it versatile. Scarf and hat are suitable for various styles of outerwear winter option... Massive down jackets and fur coats will be aesthetically combined into a single composition, ...
Original youth hat with big pompom will appeal to young girls who like to attract attention with interesting additions to the main image. You can choose a lemon or light green scarf for her, which will give the image a touch of completeness. Woolen and acrylic threads are selected for this model in a 1 to 1 ratio. Besides aesthetic functions ...
A voluminous green snood with a purple border will decorate your everyday outfit, making it original and memorable. The large design elements will catch the attention of admiring co-workers, friends and acquaintances. This set of 2 can be used to create original image and wear with sweaters, cardigans, jumpers and pullovers, or you can wear them ...
Braided hat with beautiful pattern has a classic outline, so it can be considered a versatile model that will suit outerwear with a variety of stylistic designs. The knitting density of this wardrobe item is moderate. The hat can be worn both in winter and during the demi-season. This knitted hat is perfect for any outerwear! If successful ...
An original hat and a small snood that fits snugly around the neck create a harmonious composition. With its help, you can introduce new solutions to everyday look, decorating a warm outfit in the demi-season and winter. The presented wardrobe items have no practical or stylistic limitations in terms of use cases. The light gray color of knitted headwear will suit ...
A hat and voluminous snood will go well with coats or jackets from various materials that have a narrow spanking. The presented wardrobe items will come in handy in autumn or winter. Dramatic drops in temperature and gusts of cold wind won't catch you off guard when wearing these warm, warming headwear. This stylistic version of the snood and the hat ...
The pattern in the form of wide braids gives the hat an additional decorative look. The enlarged rear section of this model has a modern style that is very popular now. In addition, curls of hair can be hidden in this part of this wardrobe item. This feature makes the hat beautiful and multifunctional at the same time. The presented model is perfect for a voluminous snood or ...
Modern fashion has proven that everyone who is confident in the old-fashioned knitted hats was very mistaken. And now it is the hand-made hats in priority. Fashionable knitted hats for girls are distinguished by a variety of styles and styles. Bright colors, embossed texture, a combination of practicality and beauty will allow you to choose a hat that suits your face and age. Suggested in this article fashionable options caps will help you make the right choice. A detailed description and diagrams will make the knitting process quick and easy.
Hat "Lilac"
Very nice off-season hat. Knits round. The calculations given are for the average size of a woman's head.
We will need:
- yarn with a wool content of at least 75% (50g per 140m) - 100g;
- circular needles # 3.25 and # 3.5;
- a set of stocking needles No 3.5;
- marker.
Patterns:
- we knit hats for girls with knitting needles, using patterns.
Density: knitting needles No3.5 25p. equal to 10cm.
Description
We type with knitting needles No 3.25 130p. and go to round knitting, having previously marked the beginning of the row with a marker. We knit using the instructions of the scheme. It shows all the rows, including the elastic. We should get 5 rapports in a circular river. When 10p remains in the work, we break the thread, thread it through the loops, pull it together, bring it to the wrong side and fix it.
Hat with braids, with a pompom: video master class
https://youtu.be/4P-xTldiJBo
Hat with arans
The model is calculated for a head size of 53 cm.
We will need:
- yarn, wool content not less than 50% (50g per 143m) - 150g;
- circular needles number 4.5;
- a set of stocking needles No4.5;
- marker.
Patterns:
- persons. smooth surface: when knitting, all knitting stitches;
- we knit using the schemes:
Density: persons. stitch 22p. for 30r. equal to 10cm by 10cm.
Description
We type with circular knitting needles 110p., Go to round knitting, having previously marked the beginning of the row with a marker.
From the 1st to the 7th p .: * 2l., 3i., 3l., 3i. * - from * to * repeat in a circle;
8r.: * 2l., 1i. from broach, 3i., 1i. from broach, 3l., 1i. from broach, 3i. * - from * to * repeat. Total 140p .:
9p .: * 2l. 4i., 4l., 4i. * - from * to * we repeat in a circle.
We continue knitting hats, using the instructions of scheme 1. Keep in mind that in 5p. and at 23r. schema you need to rearrange the marker. We knit the top of the cap using scheme 2. After 21r. we break off the thread, thread it through the remaining loops, tighten it, bring it to the wrong side and fix it.
Hat with an original pattern
Elastic size 51cm.
We need:
- yarn, composition 50% wool, 50% alpaca (50g by 132m) - 100g;
- knitting needles number 3.25;
- knitting needles number 3.5;
- additional spoke.
Patterns:
- twisted elastic: even number of p.
1p .: * 1i. for the lower slice, 1l. * - repeat from * to *;
2p .: * 1i., 1l. for the lower slice * - from * to * - repeat from * to *.
- patterns "fantasy": see diagrams
Density: on faces. smooth knitting needles No3.5 24p. for 21 rubles. equal to 10cm by 10cm.
Description
With knitting needles # 3.25, we dial 104p. We knit a twisted elastic band, starting with the purl p. We knit 5cm.
In the next. R. (out.): * 3l., 1p. from broach, 2l., 1p. from broach * - from and to * repeat 19 times, 2l., ** 1p. from broach ** - ** repeat 4p., 1l. Only 146p.
We continue knitting the cap with knitting needles No 3.5.
Track. R. (persons.): 1i., * 1st p. schemes B2, 1st p. schemes A1, 1st p. schemes A2, 1st p. schemes B1 * - from * to * repeat three times, 1i .;
track. R. (out.): 1l., * 2nd p. schemes B1, 2nd p. schemes A2, 2nd p. schemes A1, 2nd p. schemes B2 * - from * to * repeat three times, 1l.
We knit according to this principle until we complete 34 p. schemes.
We continue to work:
track. R. (persons.): 1i., * 1st p. cx. C2, 1st p. cx. B1, 1st p. cx. B2, 1st p. cx. C1 * - from * to * three times, 1i .;
track. R. (out.): 1l., 2nd p. cx. C1, 2nd p. cx. B2, 2nd p. cx. В1, 2nd p. cx. C2 * - from * to * three times, 1 liter.
We knit according to this principle until we complete 34 p. schemes. Only 80p.
We continue:
track. R. (persons.): 1i., * pattern according to cx. C2, 1L. for the lower lobule, pattern on cx. C1 * - from * to * three times, 1i .;
track. R. (out.): 1 sheet., * pattern according to cx. C1, 1i. for the lower lobule, pattern on cx. C2 * - from * to * three times, 1 liter.
We knit according to this principle until we complete 40 p. schemes. Only 32p.
Track. R. (persons.): 1i., 2p. in 1L. tilted to the left, * 2p. in 1l., remove 2p. as persons. together, 1l. and stretch it through the removed p. * - from * to * repeat 5 times, remove 3 p. as persons. one by one, we enter the end of the left cn. for the upper lobules of these items and knit them together persons., 1i. Total 14p .;
track. R. (out): 1l., 12i., 1l .;
track. R. (persons.): 1i., 1l. for the lower lobule, * remove 2p. together persons., 1l. and we stretch it through the removed p. * - from * to * we repeat three times, 2p. in 1L. tilted to the left, 1i. Only 7p.
Assembling and finishing the hat
We cut off the thread, leaving the long end, stretch it through the remaining stitches. We pull it, bring it to the wrong side and fix it. Sewing a longitudinal seam.
Hat with cat ears: video mk for beginners
Openwork hat
For an average head size.
We need:
- yarn, in the composition - wool 15%, mohair 35%, acrylic 50%, (50g by 275m) - 100g;
- knitting needles # 5 and # 6.5;
Patterns:
- elastic band: 2 l.x2 life;
- openwork: we knit according to the scheme:
Density: on openwork with needles No. 6.5 18p. for 24 rubles. equal to 10cm by 10cm.
Description
We start knitting a hat with a set of knitting needles No. 5 82p. thread in two additions. We knit an elastic band by 2.5 cm. We pass to cn. No 6.5 and continue with an openwork pattern. We carry out reductions and increases according to the scheme. After 51r. cut off the thread, thread through the remaining 12 loops and tighten. Sew the back seam.
Stylish hat for girls
For an average head size.
We will need:
- yarn, wool content not less than 80% (50g per 110m) - 150g;
- knitting needles number 6;
- buttons Ø25mm - 4 pcs.
Patterns:
- garter stitch: knit all loops;
- fancy pattern: the number of items is even.
1p .: * 1l., 1i., 1l., 1i. * - from * to * repeat. Finish 1L .;
2p .: * 1i., 1l., 1i., 1l. * - from * to * repeat. Finish 1i .;
3p.: * 1 double persons., 1i., 1 double persons., 1i. * - from * to * repeat. Finish 1 double persons. How to knit double faces. loop - see video https://youtu.be/-jHcqamLvJI
Tying faces. n. from the lower r. in this case and is called a single double facial p.
4p .: * 1i., 1l., 1i., 1l. * - from * to * repeat. Finish 1i .;
13r.: We start with the 1st r.
Description
We start knitting a hat with a set of 71p. Knit with a scarf pattern 2 r. Track. row: 3p. shawl pattern, 65p. fancy pattern, 3p. shawl pattern. Knit 25cm (64 rows). Then - 4p. shawl pattern.
Assembly
We cut off the edges of the cap in width, leaving 3p free. garter stitch. Sew the stripes of the scarf pattern end-to-end. On the seamy side of the cap, we pass a double thread through the loops of the edge, tighten, make a knot, hide the threads. Sew on two buttons.
Hat with braided pattern: video instruction
Hat "Iroquois"
We will need:
- yarn, 80% wool, 20% acrylic (50g by 65m), white- 100g;
- the same, beige - 50g;
- the same, brown - 50g;
- the same, black - 50g;
- knitting needles number 8;
- hook number 6;
- spray to fix the brushes.
Patterns:
- persons. ch .: with straight / reverse knitting in faces. R. - facial p., In int. R. - purl; when knitting round - all knit stitches;
- jacquard - we knit according to the scheme. It shows only the right half, after the center. we knit the loops on the left side in a mirror-like fashion. For reductions, knit to the extreme 3p., Knit 2L. in 1L. Knit the edging, taking all three threads of different colors.
Density: on faces. ch. 10p. by 14.5 rubles. equal to 10cm by 10cm; on jacquard 28r. equal to 20cm.
Description
We start knitting caps with valves. We collect 3p with white yarn. and knit persons. ch. (1st p. Purl). We do in even p. increments 4 times in 1p., then in the 4th p. 1 time by 1p. We get 13p. Then we collect 11p on both sides. We get 35p. We switch to jacquard and do it between chrome. n. In the 17th p. on both sides, we subtract 1 time in 1 p., after 4 p. 1 time for 1p. Then in every 2nd p. 1 time for 1p., 1 time for 2p., 1 time for 3p. The remaining 19p. close. We knit the second part in the same way.
We collect 5p with white yarn. for the center. parts. We knit persons. ch. (1st p. Purl). 50cm closed. n. Sew on the center. part to the sidewalls.
We tie the bottom of cap 1 with a row of single crochets. Then we sew it in half with brown yarn.
We braid two braids of 20 cm long from a brown thread in two folds and a white single one. We fix them at the ends of the valves - see the photo.
For the mohawk brushes, cut the yarn of all four colors by 30 cm, fold 10 threads in half, and stretch through the central part of the cap. Then we pull the free ends of the threads through the p. And tighten them tightly.
Fix the bases of the brushes with brown yarn. We put a hat on the uniform. Cut the brushes evenly to a length of 12cm. We treat them with a fixative spray and dry them.
Beanie hat, no seam: video master class
https://youtu.be/beN4rkjTTjQ
Selection of schemes
Good afternoon, today's our topic is this is KNITTING HATS ... I will show you the most beautiful models women's hats for the winter of 2016-2017 and I will tell you exactly how they are related ... In this article I will reveal to you the general principle of knitting women's hats and berets(both crochet and knitting). You can already n about one photo to understand exactly how this hat is connected... and LEARN without diagrams and descriptions to figure out for yourself what and in what sequence you need to do in order to end up knitting just such a winter hat as in the photo.
Today we will knit ...
- caps-caps on the needles (elongated and over the head)
- beret hats on knitting needles and crochet (lush and not so)
- women's turban hats (I will show one easy way on knitting needles)
- knitted hats with brims and visors (I will tell you in detail how to make brims)
- winter hats with graceful soft cuffs
- and sun-dried woolen hats with designs like those of an English lady.
So let's start knitting our fall and winter hats.
Let's start with the simplest ones ... and move on as the task gets more complicated.
Women's hats with a SIMPLE KNITTING needles ...
(cut CAP)
The fastest hat to knit is when you just chose one simple pattern(elastic band, English elastic band, knitting-rice) ... And drive almost all (or even all) part of the canvas in one pattern. Starting from the top of the head - in each row we begin to decrease the loops, and when 15-20 loops remain on the knitting needles - we pull a thread through them - and simply pull them into one bundle-point at the back of the head. According to this principle, the hat in the photo below is tied - (25 rows of knitting of the "rice" pattern ... and 15 rows of purl loops with decrease).
And in the same knit with the "rice" pattern - it would be nice to knit a cozy snoody scarf (collar).
In such a RUNNING PATTERN (of the same type) can be connected as dense winter hat (on the head in a sticky) ... And so loose spacious knitted cap model. You can decorate a woman's hat with one or two fur pom-poms.
Can be knitted CAP-CAP - as in the photo below ... She looks best when it has a fairly wide (16-20 rows) elastic band... With a narrow elastic band, such a hat is not suitable for anyone ... as it visually cuts off the skull. A wide elastic band, on the contrary, visually stretches the oval of the face ... opens the forehead and adds volume.
To knit any hat pattern precise knitting pattern in principle, and is not needed ... Since all the hats in the world are knitted according to the general principle. Here below I give a general knitting pattern for caps... And just below I will give a knitting pattern for all berets.
GENERAL KNITTING SCHEME
for any caps.
Such caps-caps can be knitted in a simple pattern WITHOUT A PATTERN ... or according to the RELIEF or Lacy pattern... Choose any pattern with knitting needles on some site ... and go.
Step 1 - START KNITTING
First and we knit an elastic band (in 12-15 rows) and further ( without adding loops on the needles) we knit the already patterned fabric of the cap. We get a model similar to photo of the purple cap above.
Or after tying the elastic we can add loops on the needles... and our canvas will begin to expand ... and we will get a model of a fluffy hat (like on the pink model from the photo above ).
An important rule of thumb for adding loops.
When adding loops when knitting a hat with a pattern only one thing is important - the total number of loops on the knitting needles must be DIVIDED BY the pattern REPORT (by the number of loops that are repeated in the pattern-pattern) ...
For example, the report (repeat) of our pattern is equal to 8 loops ... which means that the total number of loops on the needles should be divisible by 8 ... For example, there should be 160 ... or 168 ... or 176 loops ... (edge-edge loops do not count).
Step 2 - BASIC KNITTING.
Further, when the loops are added we begin to knit the pattern ... repeating the reports ...
We drive the patterned canvas to rows of 40, if you want the usual size of the hat ... (it also depends on the thickness of the threads) Trying on the head ... in the process of knitting you yourself will understand when it is enough to drive in a straight line and it is time to narrow the fabric at the crown. (You can run such a patterned cloth longer, so that the cap is taller ... or finish earlier, so that the cap flows around the head, and does not stick out or hang down - everything is up to your taste)
Step 3 - FINISHING THE HAT KNITTING .
Then when our hat approaching the back of the head(or to the length you intended) ... we begin to close the loops 4 each (or 6 ... or 8 each) in each row - the more you close the stitches in a row, the faster your knitting will end. Since knitting is considered complete when 16-20 loops remain on the needles
An important rule of thumb is to REDUCE loops.
We know that the number of loops on the needles becomes smaller if knit two loops together (as one) ... But in order for the decrease in loops to be UNIFORMAL, you need to do this decrease in any places ... and in certain sectors of the cap ... (so that these decreasing places are at the same distance from each other). That is, we divide the entire circumference of the cap into sectors (as with a knife we divide a round cake into equal pieces) ... usually an even number of sectors can be 6 ... or 8 or 10 ...
If you have a hat with a pattern(in which some drawing-report is repeated) - then the drawing itself can be a sector ... Then we do the reduction in a certain (of your choice) place of the pattern- and so in each repetition of the pattern we knit two loops together as one.
This is how it looks in the process. sectorial reduction of loops when knitting any hat or beret ... (it doesn't matter if you knit it on two knitting needles or on circular knitting needles).
for instance- we have 160 loops on the needles - and we have reached the top of our hat and we need to make a decrease. We decide to make the decrease evenly in 10 places of each row ... So we need to divide our cap into 10 sectors.
Then we divide 160 by 10, we get the number 16 ... (that is, mentally divide the hat into sectors - 16 loops in each sector). And that means further we ...
In our first decreasing row we will knit at the end of each 16-loop two loops together(that is, we hook each 15th and 16th together and knit as one) ...
In the second decreasing row there are one fewer loops left in the sector (and we will already hook each 14th + 15th loops in a row together)….
In the third decreasing row- in each sector there are even fewer loops (and we will knit together every 13th and 14th loop).
That's it - now you can complete the knitting.
We collect these remaining loops on a thread... we pull the thread, collecting all the loops into a bundle and tie it on a knot (we hide the ends of the knot inside). Close the back seam of our hat... and you're done.
LITTLE coarse knit hat ...
If you knit a cap-cap on thick knitting needles and thick threads ... then it is better to make it LITTLE - ON THE HEAD ... and wear it slightly thrown back (that is, not pushing it over the forehead).
The principle of knitting is as follows small LOW hat- exactly the same as that of a high cap-cap ... It's just that the FRONT PART of the knitted fabric will not be so long ... that is, we pass early to the MACUSHINE PART with its loop-decreasing rows.
Knitted hats - WITH EARS.
HAT WITH EARS No. 1 (dark gray in the photo below) You can knit the ears separately and then sew them to the desired place of the already finished knitted hat.
HAT WITH EARS No. 2 (light gray in the photo above) - we knit a hat in the form of a pipe - without decreasing the loops at the top of the head, and then just close the loops and Sew the front and back of the cap together in a straight line. T o have the top of the pipe flattened (and sewn this flattened edge)
And then the corners of this straight seam we turn into ears. To do this, we make a seam with threads. DIAGONALLY cutting off this corner. We make a seam with a thread, pierce through both layers (front and rear) and not with a needle, but with an ordinary crochet hook we thread the thread back and forth. Thus, our corner will not be pulled over the head like the whole hat, but stick out like a separate ear. And from the other corner of our flattened and stitched pipe of the cap, we make out the same eyelet, in the same way.
Or such ears can be conceived on a knitted hat with braids - with a lush embossed pattern. It is easy to do it yourself.
Knitted HATS with knitting needles - WITH BRAIDS.
LARGE RELIEF KNITTING "BRAID" looks very beautiful on women's hats
And braids can be placed vertically(as on the ash pink hat from the photo below).
Or you can make the longitudinal knitting of the cap - not from the forehead to the crown, but along the lateral line (along the circumference of the head) - and then our braids will be be positioned horizontally left to right - like on the gray hat with the photo below.
KNITTED HATS -
WITH BREAKERS and BANDS.
Fashionable hats with brim- reminiscent of graceful hats - so feminine, ideal under an elegant coat with flirty gloves ... Under loose curly hair
Sometimes the fields are knitted SEPARATELY and then sewn to the edge of the finished hat ...
Sometimes, in order to give such fields the necessary rigidity, special blank fields are cut out of felt ... and inserted inside the fields folded in half (like a bookmark in a booklet). This is exactly what is done on the knitted hat with the photo below.
Try to make the same (as in the photo above) fields on your hat - it's easy to do it yourself ...
Step 1 (preparatory)
First knit a hat ... Then cut out of felt a shape resembling a donut (pancake with a hole)... the inner edge of the donut hole should be the same size as the circumference of your head and the edge of your hat.
Step 2 (knitting )
Then on the needles we will knit DIRECT (rectangular fabric patterned elastic).
To do this, we collect so many loops ... so that the future canvas is equal to the length of the OUTER circumference of a felt donut (you can measure it with a centimeter or a school formula) ...
The length of the cloth should be twice as wide as the thickness of the donut - in order to wrap the donut with it from the bottom and top (since knitted fields the caps have both top and bottom) ... That is, we knit the fabric and from time to time we try it on to the width of the cut out donut - we wrap the donut barrel from the bottom and top sides and see how many more rows are missing ... we tie it to the required length.
Step 3 (stapling
)
When the canvas is tied (that is, it has reached a sufficient width for wrapping and sewing a "blank donut" into it) - we are on our canvas close the loops ... remove it from the knitting needle.
We wrap our felt bagel with a knitted fabric ... so so that the fold of the canvas is on the OUTSIDE edge a donut ... and the connecting seam of the double cloth went along the inner edge of the donut of the fields was ... (that is, we immediately wrapped and sew the halves of our cloth along the inner edge of the donut)
And then along the edge of the same seam n We sew our ready-made fields to the finished hat. And that's all. You can now knit beautiful lush flower crochet and sew it on the side of your hat.
Another way to make the fields on a knitted hat.
And in the fashionable model of a light beige hat (with the photo below) - the fields are formed by themselves when bending to the FLOOR knitted classic elastic (one front, one purl). it's easy to do it yourself.
That is, we knit an elastic band for a hat twice as long what fields should be ... and then bend it in half. We slightly stretch the bend with our hands in breadth so that it protrudes with a visor.
Sometimes a fishing line is inserted into such a bulging bend of the elastic band.- this is done so that the edges of the fields do not wrinkle from toes, but always remain even and elastic.
Sometimes a corset tape is put inside the bend - for rigidity(the tape with which the trousers are hemmed at the bottom) - and with sewing threads (tone on tone) neatly and imperceptibly sewn through stitches through the edge of the fields.
And here is a hat with WIDE lapels-brim .
Here the lapel is knitted in the shape of a bell ... which has two sides (the inner one is light and the outer one is dark). Now we will make it with our own hands.
Such a hat need to knit starting from the back of the head... that is, from top to bottom (since it will be convenient to regulate the span of the fields ... and if something happens, it will be convenient to dissolve them and knit again ....
A simple knitting pattern for this WIDE TWO-COLOR BANDED HAT ...
- The knitting of this black hat with white brims - we start from the top ... just knit a straight fabric (or a straight pipe, if on circular knitting needles ah) ... The linen of this pipe should be so long that it covers the head from crown to forehead.
- We turn to white threads - and expanding dramatically canvas from the edge of the forehead (adding loops in each row). A shape similar to a bell is formed (we reach the very edge of the fields - trying on in front of the mirror to decide whether this width of fields is enough for us). We tied the white side of the fields (the one that is visible in the photo).
- We change the threads to black and knit already TIGHTENING in reverse side(decreasing the same number of loops in each row as we added before). ... this will be the reverse side of the flap of the fields (dark) which is not visible, hidden-turned away in the photo.
- It turns out a construction in the form of ... first a narrow black pipe .... then the expanding white part ... and then the tapering black part.
- At the widest point of the canvas(where white turns into black again) we fold the canvas in half (we folded the fields of the cap in half ... And we sew this addition, fasten it with threads - we fix this double sandwich of the fields.
- And then there is only sew the upper crown seam of the cap - fold it with an envelope as seen in the photo and fasten with threads ... and (if we knitted not on circular knitting needles) we make the back seam of the cap.
Note - if you knit such a hat from thick dense threads, then the fields can not be made DUAL - they will turn out to be dense and erect without it .
(If suddenly it is incomprehensible to explain - write in the comments, I will explain in more detail and even draw ... and maybe even calculate the number of rows and loops in a row).
Knitted hat with crochet brim.
And here is a MULTI-COLORED hat, which is tied with a HOOK. Crochet fields are generally easy to crochet. There is no need to be smart here - just drive the columns in a circle, sharply adding their number in the fields.
And then, at the very edge of the fields (in the last rows), you need to slightly reduce the number of columns so that the hat itself asks for a neat upward bend.
KNITTED HATS -
WITH SOFT CREWS.
Knitted cap margins can be soft and easy to TURN TO THE HAT... then we have an elegant lapel on the knitted cap.
Here in the photo below we see an example of how the SINGLE-SIDED SIDE flap is made.
How exactly it was made, I think, is clear to everyone.
First knits top crown of a hat... And then we knit the flap itself as a separate long blade on the needles (similar to a scarf). There is only one pattern - we knit all the time from the front and from the seamy side one front loops... we get a ribbed pattern (it is thanks to this ribbing of the pattern that our fields keep their shape well).
Buttonholes are optional- we simply overlap the edges of the canvas ... and sew on buttons for decorative purposes.
And here is the front lapel ... The hat is knitted on two knitting needles (without an elastic band) so that the fabric itself wraps itself up with a beautiful knuckle up. The pattern looks like RICE ...
And here is the lapel, which is uniform around the entire circumference of the cap. It is decorated with a neat flower.
Hat with cuffs - made of soft angora.
And here is another fashionable hat - in it we see a non-standard circular knitting - and the direction of the knitted fabric goes across -
this made it possible to come up with such beautiful lapel fields. 
Here the knitting direction is HORIZONTAL (and apparently trapezoidal)... which is then sewn into a hat (if suddenly something superfluous is connected) you can always correct it with scissors (roughly) and close the cut with threads.
To be sure, we can first do a test mock-up of a hat from a piece of an old sheet(to guess its shape) ... then knit the canvas according to the shape of the layout ... and fold such a hat.
Better yet ..... knit such a hat ON SIZE MORE ... and therefore REDUCE-DUMP it (like a felt boot) in hot water (40 degrees) in washing machine... The knit will immediately become very thickened - the hat will become denser and one size smaller.
I will tell you more about the FALLING RULES right now using the example of the next two hats.
KNITTED HATS WITH LEFT - dried.
See what trendy sun-dried hats you can knit ... and felted in the washing machine.
They knit first larger than necessary. Then they are washed in hot water and the wool shrinks decreases by 30% and the hat becomes plump and warm like a soft felt fabric.
I will say in advance that both gray and pink hats are knitted according to the same instructions - this is the same model, just the manual drapery of the fields (with the help of hat pins) is slightly different for them.
A detailed description of the knocked over hats from the photo above.
(gray and red hat).
Material and product characteristics.
200 g of yarn Wash + Filz-it! Fine
(100% wool, 50 g \ 100 meters No. 00120
circular needles No. 5, stocking needles No. 5
Buckle + pin, brooch, buttons (for finishing hat brims).
Product size before felting: head circumference 70 cm, height 26.5 cm.
Product size after felting: head circumference 54, height 20 cm.
Before starting work- you should knit a sample from the purchased yarn - mark a 10 by 10 cm square on it with a bright thread. Then dump this sample in the washing machine and check how it decreases.
According to the declared yarn- the density of knitting before and after felting must match the following:
Density of knitting before felting: 10 x 10 cm = 16 stitches and 22 rows
Density of knitting after felting: 10 x 10 cm = 20 stitches 29 rows
And if your data is different (and this may be due to a different yarn, too tight knitting, or vice versa, your habit of knitting loosely and sweepingly), then you need to dial the number of loops on the knitting needles a little different. In accordance with how your prototype differs from the one presented above.
In order not to peer into the small print and encrypted abbreviations, I decided to paint step by step and along the ranks the whole process of knitting and the assembly of the cap.
STEP 1 - Knit the main part of the brim.
We start knitting from the fields - that is, we collect 124 loops on the circular knitting needles and knit circular rows with the front stitch. 20 rows in a circle. And we get the direct part of the fields (gray shading on the pattern of the fields). And we will only have to connect that part of the fields, which will be an elongated triangular shape on the pattern from the diagram below.
STEP 2 - start changing the shape of the fields
(narrow on one side and wide on the other).
At a height of 9 cm (= after 20 circular rows) we knit short rows- every second row we will decrease by 10 loops. This is necessary so that our fields turn out to be different in level - on the one hand, our field will turn out to be wider (there will be more rows), and on the other hand, our hat field will be narrow (in the place where we reduced every second row by 10 loops). Now you will learn how to do this and understand how it will look.
I decided paint each row which you knit - so that you can knit without bothering your brain by strictly repeating the steps described below.
So, at a height of 9 cm (after 20 circular rows) we knit short rows as follows.
We have on the needles the front side of 124 loops. We start to knit 21st circular row but we do not knit this row until the end, but to the last 10 stitches of the row(that is, we do not knit all 124 loops that are on the knitting needles, but only 114 front loops) , after which we stop and we need to turn the work backwards (so that the seamy side of knitting is already looking at us) and we can knit in the opposite side of the circle.
And in this opposite direction we do 1 yarn over right needle and knit the 22nd row – the same 114 loops, reduced in number, but with the purl stitch... We tied this amount to the end and unfold our knitting to the front side again to knit the next 23rd row. This is what it looks like in a drawing (I hope I drew it clearly).
On this front side and knit 23rd front row- but we also knit not all 114 loops - and again we turn the knitting before reaching 10 loops to the end. That is, in the 23rd row, we must knit 104 face loops... And turn to the seamy side - to knit on it 24th row - purl 104 (in front of each purl row, do not forget to make 1 yarn over the right knitting needle). And we turn around again to the front side.
25th row we also do not knit 10 loops to the end - but we stop at knitted Knit 94- and turn to the seamy side. Where we knit already 26 row - purl 94 loops. And we turn again to the front side.
This 27th row we also do not knit up to 10 purl loops - that is, we only knit 84 front loops. Turn knitting to the wrong side and knit Purl 28 - 84 sts. And again we turn to the front side.
This 29th row we still reduce by 10 loops - that is, we only knit 74 face loops, and unfold knitting to the reverse seamy side, and knit 30 row - 74 purl loops. We return to the front.
This 31 row- we again reduce by 10 loops - that is, we only knit 64 face loops... Turn inside out - we knit 32 row - 64 purl loops... We return to the front side.
This 33 row 54 face loops 34th row - purl 54. Expand to the front side.
This 35 row- we again reduce the knitting by 10 loops - we only knit 44 face loops... Turn inside out and knit Row 36 - Purl 44. We return to the front side.
This 37 row- we again reduce the knitting by 10 loops - we only knit 34 face loops... Turn inside out and knit Row 38 - Purl 34. We turn to the front side.
This Row 39- for the last time we reduce the stitching by 10 loops - we only knit 24 face loops... Turn inside out and knit 40th row - 24 purl loops. And after that we unroll the knitting with the right side facing us for the last time. This was the last short row. We returned to the front side.
And we can continue now our regular circular knitting- together with all 124 stitches in a row.
STEP 3 - we knit the main dome of the cap.
So, we have 124 loops on the needles, the already connected fields hang from the needles (on one side of the circle, the fields are wider 40 rows high, on the other, narrower 21 rows high.). Now we will knit the hat itself - the part that is pulled over the head.
The first thing we need to do is to tighten the transition from the brim to the dome of the hat. To do this, we knit each loop together with a yarn.
One way to close the buttonhole is with a crochet hook.
So, we closed 12 loops - which means that we have 112 loops left on the knitting needles. Of these, we will knit the dome of the cap.
We translate these loops from circular knitting needles. 4 stocking needles- 28 loops on each of the four knitting needles. And we knit in a circle, 30 front rows up. (Our knit rises another 13.5 cm (excluding margins).
Now we stopped and marked every 14th loop on our knitting (you can thread red ribbons between every 14th loop). We will need these marks (there will be 8 of them) in order to properly reduce the cap (narrow the dome).
We marked and in the next circular row we knit each 14th loop together with the previous one (that is, we knit 13 and 14 together). As a result, we have 104 loops left on the needles.
Next, we knit like this.
In every 4th row - repeat the decrease(we knit a loop marked with a ribbon together with the previous loop). We do this 3 times... (That is, 3 rows are simple, 4 are subtracted - 3 rows are simple, 4 are subtracted, and 3 more rows are simply 4 subtracted - three such runs). As a result, we have left on the needles 80 loops.
Now we subtract more.
In every 2nd row, we make the same decrease (in the same places marked with a red ribbon). We repeat 6 times. That is, we alternate 12 rows, just one + one decreasing one. As a result, we have left on the needles 32 loops.
And now we come to the end of knitting.
Three rows we make a decrease in a row - in each row. In the same places marked with a ribbon. And on the needles we have 8 loops left.
We finish knitting: cut the thread, stretch the tail of the thread through these last 8 loops. and tighten it tight. We fasten the end of the thread in the body of the hat (using a crochet hook).
STEP 4 - roll the hat
in the washing machine
+ we form its final form.
And here is a detailed description of how such hats knitted of wool can be FILLED IN THE WASHING MACHINE ...
- Place the header in a washing bag.
- We fall asleep in the washing machine powder for washing colored laundry... DO NOT add softener or detergent for woollens.
- We choose mode - delicate wash(it is with a large inflow of water - this is what we need). The mode for washing wool is NOT NECESSARY.
- Setting the temperature 40 degrees.
- Best of all together with a hat in a typewriter shove something rude(like jesses or towels) - to create extra friction.
- We start washing - as a result of which the product will decrease by 1 \ 3 (that is, by 30%) After that, we take it out - wring it out and WET-STRETCH wet it to fit the size of our head ... (so that she remembers this shape) ...
- and then we put on the MOLD where it will dry. It is, of course, clear that you do not have hat blanks in your household - n oh can you find a substitute for it- for example, a baby ball of a suitable size or a three-liter jar (to increase the size of the jar, you can wrap it with several layers of newspaper, fix it with tape and put on a bag for cleanliness) - put on a hat and leave it until it dries completely.
- After you have pulled the hat onto the blank, you must smooth out its brim - pull the brim so that on one side they are 9 cm, and on the other 15 cm.
- AND WHILE THE CAP IS DRYED, we do its styling. ...
Here is a photograph to help you. We approach the mirror and try to lay the fields as shown in the photo. The instructions say this:
Styling for a gray hat: Align the margins (9 cm and 15 cm). Tuck the brim up (both the short and long sides. Take the edge of the short, rolled up brim and turn it half down. Pin this place with a hat pin (buckle + stick).
💡. I present to you a selection: knitted hats 2017-2018. It contains the most interesting models to date, we will consider each hat with diagrams. The most current models of women's hats, knitted with a description and a photo you can find in my article!
Before starting work on the product, it is necessary to knit a sample about 10x10 cm in size. With its help, the number of loops and rows per centimeter of knitted fabric is determined, which allows you to achieve accuracy in the dimensions of the product. The knitting process begins with a set the required amount loops on two folded knitting needles - creating an initial row. After dialing, one of the knitting needles (working) is removed, and the loops remain on the knitting needle, which is taken in left hand... There are two ways of knitting: English, when the thread from the ball (working) is held by the right hand and, when a new loop is formed, is picked up by the right knitting needle, and German (continental) - the working thread is in the left hand and thrown onto the right knitting needle.
Women's knitted hats with knitting needles with schemes 2017-2018 with a description and photo
Knitting and crocheting of hats and berets is a fashionable and interesting hobby, thanks to which you can knit beautiful and warm accessories for yourself and your loved ones. We bring to your attention the most modern models of knitted hats, berets, caps for women, made with knitting needles and crocheted. All knitting patterns for hats and berets are presented with detailed descriptions and patterns of patterns.
Head circumference: 54-56 cm.
You will need: 50 g light gray / green-gray / silver (col. 102) yarn Lana grossa ROMA DEGRADE(100% cotton. 105 m / 50 g); 50 g of silver-gray (col. 14) yarn Lana Grossa ESTIVOLL(85% cotton. 15% polyamide, 150 m / 50 g); a set of stocking needles No. 5.5 and No. 6.5.
Elastic:
Garter knitting:
Would need: 50 g light gray / green gray / silver (color 102) Lana Grossa ROMA DEGRADE yarn (100% cotton. 105 m / 50 g); 50 g silver gray (color 14) Lana Grossa ESTIVOLL yarn (85% cotton. 15% polyamide, 150 m / 50 g); a set of stocking needles No. 5.5 and No. 6.5.
Elastic: alternately knit 1 person., 1 out.
Garter stitch: in circular rows, alternately knit 1 circular p. persons. p., 1 circular p. out. p. Sequence of stripes: * 8 circular p. thread ROMA DEGRADE, 8 circular p. ESTIVOLL, repeat from *. Knitting density: 16.5 p. And 31.5 circular p. = 10 x 10 cm.
Completing of the work:
Cast on 72 sts with ROMA DEGRADE thread on stocking needles No. 5.5. Distribute the loops evenly over 4 needles [= 18 sts on each spoke] and close in a circle. For the strap, tie 2 cm = 6 circular p. rubber bands. Then transfer the loops to the needles number 6.5 and carry out the boards, knitting in a sequence of strips.
Through 18 cm = 56 circular p. from the end of the strap, knit only with ESTIVOLL thread, while in the 3rd circular p. start making reductions for the top of the hat. To do this, knit as follows. 3rd circular p.: * 2 persons., 2 p. Knit together persons., Repeat from * 17 times = 54 p. 4th circular p.: Knit without subtraction 54 out. 5th circular p.: * 1 persons., 2 p. Knit together persons., Repeat from * 17 times = 36 p. 6th circular p.: Knit without subtraction 36 out. 7th circular p.: Knit 2 sts together. = 18 p. 8th circular p.: Knit without subtraction 18 out. 9th circular p .: knit 2 sts together. = 9 sts. Pull the remaining 9 sts together with a working thread. Fasten the threads carefully to the inside. side.
Head circumference: 54-56 cm.
You will need: 50 g yellow / mint / lilac (color 340) yarn Lana Grossa SILKHAIR PRINT(70% superkid mohair, 30% silk, 400 m / 50 g); 50 g of pale lilac (color 4) yarn Lana grossa galinna(72% Egyptian cotton, 28% polyamide, 155 m / 50 g); a set of stocking needles No. 6 and No. 7.
Attention! Knit in two strands, namely 1 strand of each yarn. Garter stitch: in circular rows, knit alternately 1 circular p. persons. p., 1 circular p. out. P.
Loop pattern... 1st circular p .. * 1 yarn. 1 person., Repeat from *. 2nd circular p.: Knit all loops, while lowering the yarn overs of the previous circular row and pull the loops in length. In height, repeat the 1st and 2nd circular rivers.
Density of knitting, pattern of lowered loops, in 2 strands, needles number 7: 10.5 p. And 14 circular p. = 10 x 10 cm.
Completing of the work:
On stocking needles No. 6, cast on 72 sts in two threads. Distribute the loops evenly over 4 knitting needles (= 18 sts on each knitting needle) and close in a circle. For the strap, tie 3 cm = 7 circular p. boards, knitting. Then transfer the loops to the needles No. 7. while in the 1st circular p. knit as follows: * 1 yarn over, 1 person., 1 yarn over, 2 p. knit together persons., repeat from * 23 times. In the 2nd circular river. knit out. p .. while lower the yarn overs of the previous circular row and pull the loops in length = 48 p.
Continue to sew a pattern of lowered loops. Through 17 cm = 24 circular p. from the end of the plank, start making reductions for the top of the cap. To do this, knit as follows. 25th circular p.: * 1 yarn over, 2 sts. Knit together persons., Repeat from * 23 times. 26th circular p: knit for 24 sts, while lower the yarn overs of the previous circular row and pull the loops evenly in length. 27th circular p .: * 1 yarn. 2 sts. Knit together persons., Repeat from '11 times. 28th circular p.: Knit for 12 sts, while lower the yarn overs of the previous circular row and pull the loops in length. 29th circular p.: Knit 2 sts together. = 6 sts. Pull the remaining 6 sts with a working thread. Carefully fasten all threads to the inside. side.
Head circumference: 54-56 cm You will need: 50 g of red-brown-nevy / pale pink (color 7) yarn Lana grossa galinna(72% Egyptian cotton, 28% polyamide, 155 m / 50 g); 50 g rosewood (col. 16) yarn Lana grossa secondo(55% cotton, 25% polyamide, 20% silk, 125 m / 50 g); set of stocking needles number 5.
Attention! Knit in two strands, 1 strand of each yarn.
Garter stitch: knit in circular rows, alternately 1 circular p. out. p., 1 circular p. persons. P.
Elongated garter stitch pattern: knit according to the pattern. The numbers to the right represent circular rows. Repeat rapport in width = 5 points between arrows. For clarity, the diagram shows 2 rapports. At the height of the 1-18th circular river. knit 1 time, then repeat 7-18th circular p. Density of knitting, pattern of elongated loops from boards, knitted, in two strands, knitting needles No. 5:16 p. And 21.5 circular p. = 10 x 10 cm.
Completing of the work:
On the stocking needles, cast on 70 stitches in two threads. Distribute the loops evenly over 4 knitting needles (= alternately 1 x 20 sts and 1 x 15 sts on each knitting needle) and close in a circle. Perform a pattern of elongated loops from boards, knitted = 14 rapports in a circular row.
Through 19 cm = 41 circular p. from the beginning of the work, start executing decreases for the top. To do this, knit as follows. 42nd circular p.: * 3 persons., 2 p. Knit together persons., Repeat from * 13 times = 56 p. 43rd circular p.: Knit 56 out. without subtraction. 44th circular p .: * 2 persons., 2 p. Knit together persons., Repeat from * 13 times = 42 p. 45th circular p .: knit 42 out. without subtraction. 46th circular p.: * 1 persons., 2 p. Knit together persons., Repeat from * 13 times = 28 p. 47th circular p.: Knit 28 out. without subtraction. 48th circular knit 2 sts together. = 14 p. 49th circular p.: 14 p. Knit out. without subtraction. 50th circular p.: knit 2 sts together. = 7 sts. Pull the remaining 7 sts with a working thread. Carefully fasten all threads to the inside. side.
Women's knitted hat "Owl" with a pompom
Women's knitted hat "Owl" with a pompom
The size: 55.
Materials: light green yarn (50% wool, 50% acrylic, 200 m / 100 g) 100 g, needles. No. 3.5, two small buttons.
Elastic band 2 by 2: in the front rows, knit alternately 2 persons. n., 2 out. p., in the purl rows, knit according to the pattern.
Main pattern: knit according to scheme 3. The number of loops is a multiple of 18 plus 10 points for symmetry and 2 chrome. p. The diagram shows only the front rows, knit the purl rows according to the pattern. All rows of the cap are indicated in height.
hat "Owl" with a pompom size
Pompon: wind yarn on special rings with a diameter of 8-10 cm and make a pompom.
Completing of the work: dial 84 sts on the needles and knit with an elastic band 2 by 2. After 8 rows, knit with the main pattern - perform 4 rapports, then knit 10 sts after the rapport. After completing all the rows of the scheme, cut off the working thread, leave a piece 35-40 cm long, collect all the loops on a piece of thread, fasten it and sew a hat. Attach a pom-pom from the remaining yarn to the top of the hat. Sew buttons on one element "owl" as eyes.
Hat "Owl" with a pompom scheme No. 3
The size: 56.
Materials: dark green yarn (50% wool, 50% acrylic, 300 m / 100 g) 400 g, needles No. 2.
Front surface: facial rows - persons. n., purl rows - out. P.
1 on 1 elastic: in the front rows, knit alternately 1 person. n., 1 out. p., in the purl rows, knit according to the pattern.
Roller:
After knitting 4-6 rows of the front surface, in the purl row at the beginning of the row after the edging (or on any other part of the row), insert the right knitting needle into the bow of the loop, located 4 rows below the first loop located on the left knitting needle. Hook the bow and move it to the left knitting needle, then knit this hooked loop along with the next loop on the left purl knitting needle. In this way, knit 10-30 loops of a row, then continue knitting a row with purl loops. After several rows of the front surface, make a roller on another group of loops. Then make the rollers in random order on an arbitrary number of loops of a row. On an elastic band 1 on 1 to perform a roller in the purl row after the edge under each purl loop, insert a knitting needle under the bow of the loop, located 4 rows below, hook the bow and transfer it to the left knitting needle, then knit the hooked loop together with the purl loop, knit the front loops facial. Knit in this way to the end of the row.
Cast on 135 stitches on the needles and knit 6 rows with the front stitch, then knit 4 rows with an elastic band 1 by 1. Then knit with the front stitch with rollers. At a height of 25 cm from the typesetting edge, to form the bottom, in the front row, knit the entire row of 2 stitches together, in the purl row, knit all the loops with the purl, in the next front row again knit all the loops 2 sts together and break the working thread, leaving a piece 35-40 cm long.
Collect the remaining loops into a piece, pull tight and fasten, sew a hat with the remaining piece of thread.
Spud:
Cast on 43 stitches on the needles and knit with an elastic band 1 by 1. Make a roller every 16 rows. At a height of 130 cm from the typesetting edge, after completing the next roller, close all the loops. Sew the resulting scarf into a ring.
Women's knitted hats do it yourself knitting needles
The dynamism and impetuosity of our life requires comfortable and functional clothing, and knitted hats are quite consistent with this. Such a hat can be worn in a bag or briefcase, tucked into a sleeve or pocket, while appearance and its functional properties will not suffer at all. Therefore, knitted hats are very popular among young people and children. And now, when handicraft is becoming more and more popular and fashionable, every craftswoman seeks to show her talent and skill. Knitting hats allows you to bring your wildest ideas to life and knit modern and very high quality things. The value of hand-knitted products lies in the knitter's skill, a single copy of each hat, as well as in the special energy put into the work. In this issue, we have selected a collection of fashionable and comfortable hats. We hope that following our instructions, knitting will be enjoyable, and you will enjoy the process and the result of the work.
Women's knitted hats 2017-2018 for the winter from thick yarn
Knitting is a painstaking process that requires patience, attention, and counting. After all, it is also important for us that the knitted hat, for example, be of impeccable performance. We don’t need kurguzi, careless, sloppy, it’s better not to start.
Bulky hat made of thick yarn
Women's knitted hats 2017-2018 winter fashion trends
Girls and women who follow fashion should remember that it is important not only to look good, but also to be healthy.
In winter, one of the most important elements the outer wardrobe are winter hats. This year, winter hats are very relevant as always, because our winters are, as before, cold.
Modern girls and women will be interested in fashionable winter hats of 2017 - 2018, which are presented in abundance both in material of manufacture and in shape and color.
Very fashionable hats for the winter in 2017 - 2018 - knitted hats. Warm knitted hats will protect you from wind, snow and severe frost. Winter hats, knitted, not only keep your head warm, but also keep your hair from breakage.
Knitted hats come in a wide variety of shapes. These can be knitted hats - berets, knitted hats with a visor, knitted hats with a pompom, as well as knitted hats that resemble a warm scarf.
Such winter hats will not only warm you well, but will also be an excellent addition to the created image of a confident business woman or a sporty, purposeful coquette.
Winter fur hats will be no less trendy in 2017 - 2018.
Fur hats for the winter look very stylish, one might say - even gorgeous.
Fur hats are suitable for confident women who keep an eye on their wardrobe and always keep their finger on the pulse of fashion.
Fur hats can be made from both artificial and natural fur. Winter hats made of mink, ermine, arctic fox, sable, silver fox, fox, raccoon in 2017 -2018 will be the most relevant.
But if you are an animal rights activist, we will calm you down. Thanks to modern technologies production, winter hats made of faux fur look no less interesting and beautiful than hats made of natural fur. At the same time, the service life of an artificial fur hat with proper care is quite long.
Fashionable winter hats - bowlers, which will become a universal headdress for any beauty, both for going to a business meeting, and for a date or a party, will become a bold and romantic solution for women.
If we talk about colors, winter hats can be made in both bright and more subdued shades.
When choosing a winter hat for yourself, take into account the characteristics of your face, and also compare the hat you like with the things you already have.
Knitted hats and fur hats, large enough in volume, will be at the height of fashion in 2017 - 2018. They will not only play the role of a warm element of the wardrobe, but will also decorate your stylish winter look.
Both knitted hats and fur hats for the winter, fashionable hats can be decorated with decorative elements, for example, beads, rhinestones, leather inserts, etc.
Winter knitted hats go well with a coat or down jacket, and fur hats are perfect with a sheepskin coat or a classic-style coat.
Crochet knitted hats for women
Crochet is one of the most popular types of needlework around the world, despite the fact that it appeared relatively recently, only in the nineteenth century. Do-it-yourself crochet can be used to create amazing things, from small amigurumi toys to outerwear. The crochet technique is perfect for beginner craftswomen; it will be possible to master this type of creativity from four to five years.
The size: 57.
Materials: cherry-colored yarn (70% wool, 30% acrylic, 300 m / 100 g) 100 g, for finishing yarn, the same quality, green 10 g, hook No. 2.
Main pattern: knit in single crochet stitches, threading the hook under both loops of the previous row.
Finishing pattern: knit with half-columns with a crochet, threading the hook under both loops of the previous row.
Hat bottom: knit according to the principle indicated in diagram 1.
Strapping: knit one row alternately fluffy column, one air loop(fig. 1).
Round element: knit according to scheme 2. The diagram shows all the rows and colors of the element.
Begin knitting from the center of the bottom of the hat and knit in circular rows with the main pattern according to scheme 1. When the diameter of the bottom reaches 20 cm, knit in circular rows with the main pattern without additions. At a height of 18 cm, finish knitting the crown of the hat. On the front half of the cap, knit a lapel with half-columns, the size of the lapel is indicated on the pattern. On the back half of the cap, knit "ears" with half-columns, their size is indicated on the pattern. Bundle along the outer edges of the lapel and "ears". Tie two round elements and sew them in the middle of the outer side of both "ears".
Knitted fur hat
The size: 57.
Materials: pale cherry yarn (70% wool, 30% acrylic, 400 m / 100 g) 300 g, needles No. 2.5, hook 2.
Fur pattern: crocheted. 1st row knit with single crochet. 2nd row - in the first loop of the row, knit one single crochet, then pull the loop on the hook 1-1.5 cm (Fig. 2). Remove the hook from the long loop, and lower the loop itself down and hold it with the thumb of your left hand, then insert the hook again under the loop above the long loop by its front slice (Fig. 3). Crochet the thread and pull it into the loop, then insert the hook into the next loop, grab the thread and pull it through two loops at the same time (Fig. 4). Alternate 1st and 2nd rows. In order for the extended loops to be the same size, you can pull them out with a pencil, felt-tip pen or ruler, depending on the desired loop length.
